Fisher-Price 78476 User Manual

Owner’s Manual with Assembly Instructions
Please read this manual and save it with your original sales receipt.
For Model 78476
Tools needed for assembly:Phillips Screwdriver, Slotted Screwdriver, Hammer,
and Pliers (not included); Cap Nut Assembly Tool (included).
Use only with a Power Wheels®6 Volt Lead-Acid Rechargeable Battery with A-Style Connector
and built-in thermal fuse and a Power Wheels®Super 6™Volt Charger (both included).
Product features may vary from the picture above.
CA UTION
• This package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
2
Table of Contents
Important Information
A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
B Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
D Parts Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
E Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
F Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
G Label Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
H Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
I Battery Care and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
J Car ing For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
K Rules For Safe Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
L How to Operate Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
M Statement of Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
N Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
O Authorized Service Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
• Your new vehicle requires adult assembly.Please set aside at least 45 minutes for assembly.
• You must charge your battery for 18 - 30 hours before you use your vehicle for the first time. We recommend that you start charging your battery before beginning assembly. Please see Batter y Charging beginning on page 7 for detailed instructions.
• Read this manual carefully for important safety information and operating instructions before using your vehicle.Keep this manual for future reference as it contains important information.
• This vehicle is designed for use on grass, asphalt and other hard surfaces by children 3 - 7 years of age.
• To prevent damaging the motors and gears, do not tow anything behind the vehicle or overload it. Do not exceed the maximum weight capacity of 65 lbs (30 kg).
• If you have any questions about your Power Wheels
®
vehicle, please call our toll-free service lines at 1-800-348-0751 from 8 AM to 5 PM (EST) Monday through Friday.Trained customer service representatives are available to take your call in English or French. Habla Español? Si usted tiene alguna pregunta ó necesita asistencia llame gratis 1-800-348-0755 para los Estados Unidos.Tenemos representantes que hablan español para atender su llamada.
A
• For your convenience, Power Wheels®maintains an Authorized Service Center Network with more than 400 authorized service centers nationwide. Our authorized service centers will repair or replace par ts under warranty at no extra charge, and can perform non­warranty repairs for a minimal charge. Please see the Authorized Service Center list beginning on page 24 to find the authorized service center nearest you, or call 1-800-348-0751.
• Please complete and return the enclosed Registration Card today, or call 1-800-348-0751 to register your vehicle by phone.
WARNING
• Children can be harmed by small parts, shar p edges and shar p points in the vehicle’s unassembled state, or by electrical items.Care should be taken in unpacking and assembly of the vehicle.Children should not handle par ts, including the batter y, or help in assembly of the vehicle.
• Keep small parts and plastic bags out of children’s reach.Dispose of plastic bags properly.
• Adult supervision is required. Children do not have the judgement necessary to avoid many accidents. Be sure that children operating this vehicle can do so safely and that they are supervised at all times.
• Never use near steps, driveways, steep inclines, roadways, alleys, swimming pool areas or other bodies of water.
• Always wear shoes or sneakers when operating this vehicle.
• Never allow more than one rider.
• The rider should sit on the seat when the vehicle is in operation.
• Never alter this vehicle or its electrical system in any way. Alterations could cause a fire resulting in injury and could also ruin the electr ical system.
• Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
• Use of Power Wheels
®
components in products other than Power Wheels®vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only.The batter y is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injur y.
• Never lift or carry the battery by the wires or connector. This can damage the battery and possibly cause a fire resulting in injury. Lift and carry the batter y by the case only.
• Read the cautions on the back panel of the battery.
• Never allow children to charge the batter y. Batter y charging must be done by adults only. A child could be injured by the electricity involved in charging the batter y.
• Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the worn or damaged part.
Warnings
B
3
Parts
C
Rear Wheel - 2Front Wheel - 2
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Some parts were placed under the seat for shipment. Press the tab under the back of the seat and lift to access the battery compar tment.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant.
Rear Wheel Driver - 2
Cowling
Hand Grip - 2
Rear Hubcap - 2
Front Hubcap - 2
Steering Column
Vehicle Body (with Seat)
4
All Shown Actual Size
Not Shown: Label Sheet, Literature Bag
* Do not discard the foam spacer packaged with the battery. Save it for use in the vehicle's battery compartment.
2" Screw – 2
Cap Nut – 6
7
/16" Washer - 4
6 V olt Battery
Hex Bushing - 6
Cap Nut
Installation Tool
#6 x 1/2" Screw*
#8 x 1" Screw* - 2
Microphone
®
6 V olt Charger
WARNING
PREVENT FIRE
• Do not bypass a Power Wheel
• Use only a Red Power Wheels
• Never modify the electrical
OR OPERATE
* For your convenience, extra washers, screws and cap nuts may have been included.
#6 x 1/2" and #8 x 1" screws included as part of console assembly.
5
Parts
Console
Handlebar
Rear Axle
Steering Bushing
Foam Spacer*
Handlebar Neck
Parts Diagram
D
6
1. Vehicle Body
2. Cowling
3. Seat
4. Rear Wheel - 2
5. Rear Hubcap - 2
6. Cap Nut - 6
7. Steering Column
8. Front Wheel - 2
9. Front Hubcap - 2
10. Console - Upper
11. Console - Headlight
12. Console - Lower
13. Microphone
14. 6 V olt Battery
15. Hand Grip - 2
16. Handlebar
17.7/16" Washer - 4
18. Handlebar Neck
19. Hex Bushing - 6
20. Rear Wheel Dr iver - 2
21. 2" Screw - 2
22. Rear Axle
23. Steering Bushing
24. #6 x 1/2" Screw
25. #8 x 1" Screw - 2
26. Foam Spacer
Not Shown
6 V olt Charger Label Sheet
TM
1
3
13
25
16
15
11
10
4
20
5
9
19
19
6
7
17
2
12
21
18
14
6
22
17
19
26
24
23
6
6
8
Battery Charging
E
Important Notes:
• Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time.
• We recommend that you start charging your battery before beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to recharge it.
• Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process. If damage is detected, do not charge the battery or use it in your vehicle.Battery acid is very corrosive and can cause severe damage to surfaces it contacts.
• Do not charge the battery on a surface which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery.
• Use only a Power Wheels®Super 6™volt charger with an A-style connector (120 VAC 60 Hz 15W with an output of 6 VDC 7.2W) to charge your Power Wheels®6 volt battery with built-in thermal fuse.
7
WARNING
• The battery must be handled by adults only.The battery is heavy and contains sulfuric acid (electrolyte). Dropping the battery could result in serious injur y.
• Never allow children to charge the battery. Batter y charging must be done by adults only. A child could be injured by the electricity involved in charging the battery.
• Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
• Use of Power Wheels
®
components in
products other than Power Wheels
®
vehicles could cause overheating, fire or explosion.
• Read the cautions on the back panel of the battery.
• Never lift or carry the battery by the wires or connector.This can damage the battery and possibly cause a fire resulting in injury. Lift and carr y the batter y by the case only.
• Examine the battery, charger and their connectors for excessive wear or damage each time you charge the battery. If damage or excessive wear is detected, do not use the charger or the battery until you have replaced the wor n or damaged part.
• Never alter this vehicle or its electrical system in any way.Alterations could cause a fire resulting in injury and could also ruin the electrical system.
CAUTION
Use the charger in dry locations only.
About Thermal Fuses
Your Power Wheels®battery is equipped with a built-in thermal fuse.The thermal fuse is a self-resetting safety device which automatically “trips”and shuts down operation of the vehicle if the vehicle is overloaded or the driving conditions too severe. Once the fuse has “tripped”, it will automatically reset itself after approximately 25 seconds and allow the vehicle to resume normal operation.To avoid repeated automatic shutdowns, do not overload the vehicle by exceeding the maximum weight capacity or by towing anything behind the vehicle. Avoid severe driving conditions, such as driving up very steep hills or running into fixed objects, which can cause the wheels to stop spinning while power is still being supplied to the motors.
If under normal use conditions the thermal fuse continually trips, contact your local Power Wheels®Authorized Service Center.Please refer to the Authorized Service Center listing beginning on page 24 for the location of the Authorized Service Center nearest to you.
A-Style Battery Connector
Battery Charging
8
1
2
• Plug the charger and battery connectors together. Push firmly to make sure the two connectors are completely joined.
• Plug the charger into a standard 120 volt wall outlet. Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
Before first time use, charge the battery for at least 18 hours. Never charge the battery longer than 30 hours.
Recharge the battery for at least 14 hours after each use of your vehicle.Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector from the battery connector.Unplug the charger from the wall outlet.The battery is now charged and is ready to be installed in your vehicle.Please see "Battery Installation" on page 17 for detailed battery installation instructions.
Incorrect Correct
WARNING
PREVENT FIRE
• Do not bypass a Power Wheel
• Use only a Red Power Wheels
• Never modify the electrical
PREVENT FIRE
Do not bypass a Power Wheel
Use only a Red Power Wheels
• Never modify the electrical
Avertissement
A-Style Charger Connector
GAP
NO GAP
®
Avertissement
WARNING
PREVENT FIRE
PREVENT FIRE
• Do not bypass a Power Wheel
• Do not bypass a Power Wheel
• Use only a Red Power Wheels
• Use only a Red Power Wheels
• Never modify the electrical
• Never modify the electrical
• Position the vehicle body upright.
• Fit and hold a rear wheel driver against the motor pins on one end of the motor assembly.
• While holding the rear wheel driver in place, slide the rear axle into the hole in the opposite side of the motor assembly. Make sure the rear wheel driver on the rear axle assembly fits onto the pins on the motor assembly.
• Take the rear wheel driver off the open end of the rear axle.
3
Rear Axle Assembly
Rear Axle
Motor Assembly Pins
Rear Wheel Driver
Assembly
9
1
• Fit a cap nut onto one end of the rear axle.
• Tap the other end of the rear axle with a hammer to secure the cap nut on the end of the rear axle.
Note: You may want to position the cap nut on a scrap block of wood to protect the assembly surface.
• Slide a hex bushing, ring side first, onto the rear axle.
• Slide a rear hubcap, ring side first, onto the rear axle. (The rear hubcaps are larger than the front hubcaps.)
• Slide a wheel onto the rear axle. (The rear wheels are larger than the front wheels.) Make sure the ribs on the rear wheel face up.
• Slide a rear wheel driver, r ing side first, onto the rear axle. Fit the grooves on the rear wheel driver onto the ribs on the wheel.
• Slide a washer onto the rear wheel axle.
• Set the rear axle assembly aside.
2
Rear Axle
Cap Nut
Washer
Rear Wheel
Hex Bushing
Rear Wheel Driver
Rear Hubcap
F
Loading...
+ 19 hidden pages