Fisher-Price 78328 Instruction Sheet
www.fisher-price.com
Model
78328
Rescue Center
Welcome to the Imaginext™System
Preschool children will enjoy using all parts of this toy to build structures of their own
creation. At first they will need parental assistance to build the structure on the front cover.
It may be easier to use our step-by-step instructions and give your preschooler only the
parts that will be assembled in each step.The more your child plays with this toy, and
development and skill increases, the less assistance your child will need!
The Imaginext™system lets your child’s imagination
come alive. With Quick-Snap panels™, kids can build
different structures in lots of different ways. Use
some of the parts or all of them!
Please keep this instruction sheet for future reference, as it contains important information.
Requires two “AAA” (LR03) alkaline batteries (not included).
Adult assembly is required for battery installation.
Tool needed for battery installation: Phillips screwdriver (not included). For children 4-10 years.
2
Each sold separately and
subject to availability.
Each sold separately and
subject to availability.
Building System Tips
Here are a few basic tips of the Imaginext System!
Posts Up
Posts on walls should always
face up.
Locate Snaps
Note the locations of the snaps
on platforms.
Walls Before Platforms
Assemble walls before attaching
to a platform.
Use Spacers Between Walls
that Connect to Platforms
Walls joined side-by-side may
require a spacer between
them when connected to
two single platforms, or
one double-wide platform.
Build Up
Build the bottom layer first,
then build additional layers.
Use a platform between each
layer of your design.
Spacers Between Assemblies
Use a spacer to connect
assemblies when needed.
Posts Up
Wall
Snap
Platform
Wall
Assembly
Platform
Spacer
Assemblies
Layer 1
Layer 2
Platform
Wall
Wall
Spacer
Double-Wide
Platform
3
Battery Installation
• Locate the battery compartment
door on the sounds and lights box.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
•Insert two, "AAA" (LR03) alkaline
batteries, as indicated inside the
battery compar tment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop, it’s time for an
adult to change the batteries!
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion can
damage this toy. Dispose of
batteries safely.
• Do not dispose of batteries in a fire.
The batteries may explode or leak.
•Never short circuit the battery terminals.
• Non-rechargeable batteries are not to
be recharged.
• Only batteries of the same or
equivalent type as recommended in
the "Battery Installation" instructions
are to be used.
• If removable rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed
from the toy before the y are charged.
• If you use a battery charger, it should be
examined regularly for damage to the
cord, plug, enclosure and other parts. Do
not use a damaged batter y charger until
it has been properly repaired.
Battery
Compartment
Door
1.5V x 2
“AAA” (LR03)
Shown Actual Size
4
5
Let’s Build It!
2.
4.
3.
• Proper label application will help to keep the
labels looking their best! When applying labels,
keep the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surfaces of this
toy with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it
has been applied.
1.
Loading...