Please keep this instruction sheet for future reference,
Tool required for assembly: Phillips screwdriver (not included).
Product features and decorations may vary from the picture above.
as it contains important information.
Adult assembly is required.
Page 2
Parts
Pyramid Top
Main Pyramid
Dungeon
Chin
#6 x 1/2" Screw - 12
SHOWN ACTUAL SIZE
CAUTION
Staircase
Magic Chamber
Column
Treasure Box
Rope Swing
2 Flame Missiles
Cobra Launcher
This package contains small parts
in it’s unassembled state.
Adult assembly is required.
2 Stone Discs
2
Crown
Page 3
Building the Pyramid
12
Main Pyramid
Dungeon
Slot
Tab
Magic Chamber
• Place the main pyramid on a flat surface with the
back facing you.
• Slide the tab on the magic chamber into the slot
in the main pyramid.
• Slide the tab on the dungeon into the slot in the
main pyramid.
Slot
Tab
Back View
Dungeon
Magic Chamber
Bottom View
• Tip the assembly so that the bottom is facing you.
• Insert three screws through the magic chamber
and into the main pyramid.Tighten the screws
with a Phillips screwdriver. Do not over-tighten.
• Insert three screws through the dungeon and into
the main pyramid.Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
• Turn the assembly upright.
3
Page 4
Building the Pyramid
34
Staircase
Tab
Tab
Slot
Button
Back View
• Hold the staircase upright with the button
facing you.
• Tip the staircase and insert the tabs on either
end of the staircase into the slots in the magic
chamber and dungeon as shown.
• Rotate the staircase down.
Slot
• Tip the pyramid top and insert the tabs on either
end of the pyramid top into the slots on the
staircase and dungeon as shown.
Pyramid Top
Slots
Back View
4
Page 5
Building the Pyramid
5
Pyramid Top
Back View
Back View
• Insert six screws through the pyramid top, staircase,
and into the main assembly.Tighten the screws
with a Phillips screwdriver. Do not over-tighten.
• Insert and “snap” the rope swing tab into the hole
in the pyramid top.
Rope
Swing
6
Pegs
Hole
Front View
• From the front of the assembly, position a hole
on the chin so that it fits over a peg above
the doorway.
• Squeeze the back of the chin to fit the hole
on the other end onto the other peg above
the doorway.
Chin
5
Page 6
Building the Pyramid
7
Crown
Slots
Front View
Tabs
Sphinx Head
Holes
8
Column
Tabs
Base
Front View
• Insert the ends of the crown into the holes
above the sphinx head.
• Press down on the crown to “snap” the tabs into
the slots near the front of the sphinx head.
• Fit the tabs on the bottom of the column onto
the slots in the base.
• Press down on the column to “snap” it into place.
6
Page 7
Label Decoration
3
2
4
1
10
7
8
11
6
Front ViewBack View
Proper label application will help to keep the labels looking their best! When applying labels, keep
the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of this toy with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results,avoid repositioning a label once it has been applied.
One-time assembly is now complete.
9
5
7
Page 8
Pyramid Features
Cobra Launcher
CAUTION
• Do not launch the flame missile at close range.
• Only use the projectiles (flame missiles) supplied with
this toy.
• Do not fire at people or animals.
Cobra Launcher
Flame Missile
• Insert a flame missile into the slot on the
cobra launcher.
• Press the button to fire the flame missile.
• Place and fire the cobra launcher on the
sphinx head to keep out unwanted visitors.
Hint: If the launcher separates from its base, simply fit the ball of the
launcher into the socket of the base and press down to reattach.
Press Button
Ball
Socket
Base
8
Page 9
Pyramid Features
Placing the Traps and Treasure
Ancient
Sarcophagus
Stone Disc
Press Button
• Pull the chin down to open the mouth of the
sphinx. Place the two “stone”discs into the
slots inside the mouth. Push the chin back
up to close the mouth.
Treasure Box
Hook
• Press the button on the staircase to open the
ancient sarcophagus.The doors open and the
sarcophagus base springs up.
• Fit the slot on the treasure box onto the hook on
the sarcophagus base.
• Push the treasure box down.
• Close the sarcophagus doors.
• Pyramid explorers can now press the button to
see the treasure box.
Hint: The treasure box has a drawer that slides out to
reveal riches.
9
Page 10
PUSH
Pyramid Features
Pyramid Entry
Try to figure out the secret code
to enter the pyramid!
Cylinder
• Place a figure in front of the pyramid door.
• First, turn the cylinder to show a symbol.
• Then, press the cylinder. Either the door opens to
allow entry, or the sphinx opens its mouth to drop
“stone”discs on the unwelcomed intruder.
• Turn the cylinder to a different symbol and press it
to see what happens.
• To reset the trap, simply replace the discs in the
sphinx’s mouth and close it.
• Slide the door closed.
Dungeon
• To set the dungeon trap, press the tab on the
trap door to raise it. Lift the gate to lock it
in place.
• To spring the trap, place a figure on the trap
door and push down.The figure falls into the
dungeon and the gate closes!
Traps!
Press Button
• As treasure hunters approach the sarcophagus
near the staircase, press the floor button to
drop the stairs and slow them down.
• To reset the stair trap, simply lift the staircase
and “click” it back in place.
10
Page 11
Sarcophagus
Pyramid Features
The Magic Chamber
3
1
2
• To open the magic chamber,grasp the sarcophagus and slide it up . With the sarcophagus in an
up position, pull the magic chamber drawer out .
• Place a figure in the magic chamber .
• With the sarcophagus in an up position, push the drawer shut .
• To make that figure disappear,slide the sarcophagus down and pull the magic chamber drawer
6
out . The figure “disappears”.
• To make the figure reappear,close the drawer,with the sarcophagus down. Slide the sarcophagus up.
With the sarcophagus in an up position, pull the magic chamber drawer out.The figure is back!
4
Drawer
2
3
5
6
1
4
5
Care
• Wipe this toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
11
Page 12
Consumer Information
Questions? We’d like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS,
8 AM- 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470.Or, write to:
Fisher-Price®
Consumer Relations
636 Girard Avenue
East Aurora, New York 14052