Battery Replacement
Battery Replacement
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
1.5V x 2
“AA” (LR6)
SHOWN ACTUAL SIZE
For best performance, we recommend
replacing the batteries that came with
this toy with new alkaline batteries.
• Locate the battery compartment on
the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. (The screw will remain
in the door.)
• Lift to remove the battery compartment door.
• Insert “AA” (LR6) alkaline batteries as
indicated inside the battery
compartment, as shown above.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Battery leakage
and corrosion can damage this toy.
Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to
be recharged.
• Only batteries of the same or equivalent
type as recommended in the “Battery
Replacement” instructions are to be used.
• If removable rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it should be
examined regularly for damage to the
cord, plug, enclosure and other parts.
Do not use a damaged battery charger
until it has been properly repaired.
Battery
Compartment
Door
Battery
Compartment
Door
Battery Compartment
Battery Compartment
Garbage Truck
Family Van