Battery Replacement
Battery Replacement
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
For best performance, we recommend
replacing the batteries that came with this
toy with three new alkaline (LR6) batteries.
• Locate the battery compartment on
the bottom of the fire truck.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. (The screw will remain
in the door.)
• Lift to remove the battery compartment door.
• Insert three “AA” (LR6) alkaline
batteries as indicated inside the
battery compartment.
Helpful Hint: We recommend using
alkaline batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy
become faint or stop working, it’s time
for an adult to replace the batteries!
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during
long periods of non-use. Always
remove exhausted batteries from
the toy. Battery leakage and
corrosion can damage this toy.
Dispose of batteries safely.
• Never short circuit the
battery terminals.
• Non-rechargeable batteries
are not to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the “Battery Replacement”
instructions are to be used.
• If removable rechargeable batteries
are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug,
enclosure and other parts. Do not
use a damaged battery charger
until it has been properly repaired.