Fisher-Price 77831 Instruction Sheet
IMPORTANT!
Terminal
Base
Terminal
• Position the terminal base on a flat
surface. Insert and "snap" the tabs on
the bottom of the terminal into the slots in
the terminal base as shown. Press firmly
on all corners of the terminal to make
sure all five tabs have snapped in place.
• Pull up on the terminal to be sure it
is secure.
For proper toy function, the terminal must be
fully attached to the terminal base.
1
Install the batteries
Attach the terminal
Battery Compartment Door
Terminal
Base
• Locate the battery compartment door on
the bottom of the airport base.
• Loosen the screw in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
2
Press
Firmly
Terminal
Roll at least 6
inches
Test the toy for
proper function
3
• Locate the power switch on the bottom of
the toy and slide it to the “on” position.
• Roll a vehicle in a straight line down the
runway on the terminal base.
- Roll the vehicle at least six inches at a
constant speed (not too slow or fast).
- Press firmly when rolling, so you can
hear the "clicking" sound. (The clicking
sound activates the sound effects.)
- Be sure you are testing in a quiet room
(free from background noise).
The terminal should light up and sound
effects should be heard. If you don’t see
any lights and hear sound effects, the
terminal may not be properly connected to
the base. Please repeat step 1.
Runway
• Insert four, "AA" (LR6) alkaline
batteries, as indicated inside the
battery compartment.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Hint: We recommend using alkaline
batteries for longer battery life.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in China
©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 77831-0922
Loading...