Battery Replacement
For best performance, we recommend replacing the batteries that came
with this toy with two, new alkaline batteries.
1.5V x 2
“AA” (LR6)
Shown Actual Size
• Locate the battery compartment
on the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert two “AA” (LR6) alkaline
batteries as indicated inside the
battery compartment.
Helpful Hint: We recommend
using alkaline batteries for longer
battery life.
• Replace the battery compartment
door and tighten the screw with
a Phillips screwdriver. Do not
over-tighten.
• When sounds or lights from this
toy become faint or stop working,
it’s time for an adult to replace
the batteries!
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion can
damage this toy. Dispose of
batteries safely.
• Do not dispose of batteries in a fire.
The batteries may explode or leak.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not
to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the "Battery Replacement"
instructions are to be used.
• If removable rechargeable batteries
are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug,
enclosure and other parts. Do not
use a damaged battery charger
until it has been properly repaired.
Battery Compartment Door
2