Page 1
Mixie the Cement Truck
™
Mixie the Cement Truck
™
Dumpety the Dump Truck
™
Dumpety the Dump Truck
™
Product features may vary from the pictures above. Each sold separately and subject to availability.
Please save this instruction sheet
for future reference, as it contains
important information.
Requires three “AA” batteries
(included). Adult assembly is required
for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
D
i
s
c
o
v
e
r
w
h
a
t
’
s
p
o
s
s
i
b
l
e
™
…
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
77609
77610
Page 2
2
Battery Replacement
Battery Replacement
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
• Locate the battery compartment on
the bottom of the toy.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver.
• Remove the battery compartment door.
• Insert three “AA” (LR6) alkaline
batteries as indicated inside
the battery compartment.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds from this toy become
faint or stop working, it’s time for an
adult to replace the batteries!
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during
long periods of non-use. Always
remove exhausted batteries from
the toy. Battery leakage and
corrosion can damage this toy.
Dispose of batteries safely.
• Do not dispose of batteries in
a fire. The batteries may explode
or leak.
• Never short-circuit the battery
terminals.
• Non-rechargeable batteries are
not to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the “Battery Replacement”
instructions are to be used.
• If removable rechargeable batteries
are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly
for damage to the cord, plug,
enclosure and other parts. Do
not use a damaged battery
charger until it has been
properly repaired.
Battery
Compartment
Door
For best performance, we recommend
replacing the batteries that came with
this toy with three, new alkaline “AA”
(LR6) batteries.
Page 3
3
Construction Fun and Sounds
Construction Fun and Sounds
• Push the truck driver down in the seat or tip the truck
bucket or cement drum to dump the boulders and hear
construction sound effects.
• Roll the truck to see it bump and bounce.
PUSH
TIP
Page 4
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 77609pr-0920
Care
Care
FCC Statement (United States Only)
FCC Statement (United States Only)
Consumer Information
Consumer Information
• Wipe the toy with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
Questions? We'd like to hear from you!
Call Fisher-Price
®
Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using
TTY/TTD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price
®
Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate
the equipment.
Loading...