• Open the fastener flap on the back
of the toy to locate the sounds and
light unit.
• Loosen the screw in the battery
compartment cover using a Phillips
screwdriver. (The screw will remain
in the cover.)
• Lift to remove the battery
compartment cover.
• Insert three, new “AAA” (LR03)
alkaline batteries as indicated inside
the battery compartment.
Helpful Hint: We recommend use
of alkaline batteries for longer
battery life.
• Fit the tab on the bottom of
the battery compartment
cover into the slot in the battery
compartment and close the cover.
• Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or light from this
toy stop working or work erratically,
it’s time for an adult to replace
the batteries!
Batter y Tips:
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Battery leakage and corrosion
can cause damage. Dispose of
batteries safely.
• Never short circuit the battery
terminals.
• Non-rechargeable batteries are not to
be recharged.
• Only batteries of the same or
equivalent type as recommended in the
“Battery Installation” instructions are to
be used.
• If removable rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it should
be examined regularly for damage
to the cord, plug, enclosure and
other parts. Do not use a damaged
battery charger until it has been
properly repaired.
Shown Actual Size
“AAA” (LR03) 1.5V x 3
Battery
Compartment
Sounds and
Light Unit
Fastener
Flap
Battery Installation
Squeeze Junior
Asparagus to
activate lights
and sounds. Junior
Asparagus helps
kids learn not to
be afraid of the
dark as he hums
a lullaby, talks
and softly
glows.
Battery Installation and Use
I’m not
scared!
IMPORTANT! Should the light bulb
become non-functional, you are
advised to remove and replace it. This
should be carried out away from the
child’s sleep or play area.
• Loosen the screw on the light bulb
cover using a Phillips screwdriver.
• Twist the light bulb cover counterclockwise and lift to remove.
• Remove and properly discard the
light bulb. Beware of cracked or
broken glass.
• Replace the light bulb with a new
PR7 (or equivalent) light bulb.
Sounds and
Light Unit
• Open the fastener flap on the back
of the toy to locate the sounds and
light unit.
• Pull firmly to remove the sounds and
light unit from the toy.
• Fit the sounds and light unit back
into the toy.
• Close the fastener flaps.
Sounds and
Light Unit
Sounds and
Light Unit
• To replace the light bulb cover, fit the
slots on the light bulb cover onto the
pegs on the sounds and light unit.
• Twist the light bulb cover clockwise to
secure it in place.
• Replace the screw and tighten
with a Phillips screwdriver. Do not
over-tighten.
Light Bulb (Glass Bulb) Replacement
Fastener Flap
Sounds and
Light Unit
Fastener
Flap
Light Bulb
Cover
Light Bulb Cover