
77457
77459 77460
Each sold separately and subject to availability.
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three (LR44) alkaline button cell batteries (included).
Adult assembly is required.
Tool needed for battery replacement:
Phillips screwdriver (not included).
77458
www.rescueheroes.com
www.rescueheroes.com

GETTING READY FOR RESCUE
GETTING READY FOR RESCUE
IMPORTANT! Attachment of the connector to the back of the
figure is a permanent assembly.
• Position the backpack and
Backpack
Connector
Grooves
LET'S GO
LET'S GO
the figure upright.
• Slide the backpack connector into the grooves on
the back of the figure until
you hear a “click”.
• Slide the backpack up to
remove it from the figure.
The connector should
remain attached to
the figure.
• Fit the backpack onto
the connector on the
figure’s back.
• Press the button on the
backpack to hear the
figure talk and watch
the light flash!
• Press the button again
to hear more phrases!
2
2
2

CARE
CARE
• Wipe the toy with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the toy.
CONSUMER INFORMATION
CONSUMER INFORMATION
Visit us on line at www.service.fisher-price.com
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,
9 AM - 7 PM EST Monday through Friday and 11 AM - 5 PM EST
Saturday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437 . Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
www.service.mattel.com
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui,
HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA 77457c-0920
3
3

BATTERY REPLACEMENT
BATTERY REPLACEMENT
• Remove the backpack from the figure.
• Locate the battery compartment door on the backpack.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door. Remove and
throw away the exhausted batteries.
• Insert three, new, button cell (LR44) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• When sounds or lights become faint or stop, it’s time for an adult
to change the batteries!
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
4
4

BATTERY SAFETY INFORMATION
BATTERY SAFETY INFORMATION
1.5V x 3
LR44 or Equivalent
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated on the battery compartment door.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of the toy in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removeable, rechargeable batteries are used, they are only
to be charged under adult supervision.
5
5

FCC STATEMENT
FCC STATEMENT
United States Only
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate
the equipment.
6
6