CONSUMER INFORMATION
• Insert three 4 x
5
/
8
" screws into the
bottom cover and side cover, as
shown. Tighten the screws with a
Phillips screwdriver. Do not
over-tighten.
Repeat this procedure to repair the
other end of the track.
8
• Place the new bottom cover onto the
end of the track. Rotate the bottom
cover so that the tab fits under the
edge of the end link.
Hint: You may need to bend the bottom
cover slightly to fit it to the end link.
This may require some force
• Fit the new side cover onto the end link.
7
Ta b
Side Cover
Bottom Cover
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in China.
2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 77306pr-0922
Screw
Screw
Screw
Ta b
Peg
• Route the wire around the tab in the
end of the track and under the peg
in the new end link as shown.
• Fit the connector onto the two pegs
on the new end link.
6
Connector
#4 x 5/8" Screw
Shown Actual Size
Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using
TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price
®
Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.