Fisher-Price 75967 Instruction Sheet

Supersize Sandbox

Supplemental Instructions

Model 75967

• Please save these instructions for future reference.

• Adult assembly is required.

• No tools are needed for assembly.

IMPORTANT! Please use these instructions for assembly step 1.

• Place the base on the surface in which you intend to use the sandbox.

Note:

Assemble the panels to the base going in a clockwise direction.

• Fit the grooves on one of the panels to the ribs on the base, as shown.

• Fit another panel onto the base. Snap both tabs on the first panel into the slots on the second panel.

Tab

Tabs

Slots

Grooves

2nd Panel

Clockwise

1st Panel

Base

Ribs

Assembly

Helpful Hint: You may have difficulty snapping the panel tab closest to the base. Lift the assembly up slightly. While pushing up from the underside of the assembly (directly below the tab), push down on the topside of the assembly (directly above the tab).

• Insert and snap the tab on the outside edge of the first panel into the slot in the outside

edge of the second panel.

• Repeat this procedure to assemble the remaining six panels to the base.

Please refer back to the original instructions, Assembly Step 2.

Tabs

Push Down

Push Up

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©1999 Mattel, Inc. All Rights Reserved. Printed in U.S.A. ® and ™ designate U.S. trademarks of Mattel, Inc. 75967-0921