Battery Replacement
1.5v x 3
LR44 or equivalent
SHOWN ACTUAL SIZE
• Loosen the screw in the back of
the Little Talker™with a Phillips
screwdriver. (The screw will
remain in the Little Talker.)
• Lift the outer shell off the
Little Talker.
Outer
Shell
Base
Battery
Compartment
2
Battery Tips:
• Do not mix old and new batteries.
• Do not mix different types of
batteries: alkaline, standard
(carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during
long periods of non-use. Always
remove exhausted batteries from
this toy. Battery leakage and corrosion can cause damage.
Dispose of batteries safely.
• Never short circuit the
battery terminals.
• Non-rechargeable batteries are
not to be recharged.
• Only batteries of the same or
equivalent type as recommended
in the “Battery Replacement"
instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be
removed from the toy before they
are charged.
• If you use a battery charger, it
should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use
a damaged battery charger until it
has been properly repaired.
• Stack three alkaline button cell
batteries (LR44 or equivalent)
into the battery compartment.
Make sure the battery designation
(printed on the top of each battery) faces up.
• Fit the outer shell back onto the
base, being careful to align the
screw in the outer shell with the
hole in the base.
• Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Screw
Note! When your Little Talker
™
stops working, it’s probably time to
replace the batteries. We recommend use of alkaline batteries for
longer battery life.