Fisher-Price 74290 Instruction Sheet
Harley Motorcycle Footboard Assembly
Remove Screws
White Connector
Black Terminal
Discard Footboard Assembly
Replacement Instructions
Model Numbers: 74290, 74370
Black Terminal
Remove Screws
White Connector
1
Remove the two screws in the footboard assembly.
2
Slide the footboard assembly from the motorcycle.
3
Turn the footboard assembly on its side. Gently wiggle to remove
the white connector from the black terminal.
Discard Footboard Assembly
4
Discard the footboard assembly.
Top Tab
Replace Screws
Slot
Footboard Replacement Instructions
TOP VIEW
Top Tab
75
Slot
Locate the top side of the motorcycle white connector.
6
Insert the new footboard assembly black terminal into the slots in
the motorcycle white connector.
If you have further questions, please contact Fisher-Price
Consumer Relations at 1-800-348-0751, M–F 9AM to 7PM, Sat 11AM
to 5PM (EST) or visit us online at www.service.fisher-price.com.
®
Write to us Fisher-Price
East Aurora, New York 14052.
Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470.
Consumer Relations, 636 Girard Avenue,
®
Slide the new footboard assembly back onto the motorcycle.
Make sure the top (shown) and bottom (not shown) tabs insert
into the slots on the motorcycle.
Replace Screws
8
Re-insert the screws into the new footboard assembly. Tighten the
screws with a Phillips screwdriver. Do not over-tighten.
IMPORTANT! Test the operation of the new foot pedal. Press the
foot pedal down. The motorcycle should move. If the motorcycle
does not move, you have incorrectly assembled the new footboard
or your battery needs to be re-charged. Please re-read these
instructions and re-assemble the footboard correctly. Or, refer to
your motorcycle Owner’s Manuel for instructions on how to charge
your battery.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in USA
©2008 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. 74290pr-0922
Loading...