Page 1
1-2-3 Sing-Along Puppy
1-2-3 Sing-Along Puppy
™
™
Model Number: 71298
Please save these instructions for future reference.
Adult assembly is required to install batteries.
Tool needed to install batteries: Phillips Screwdriver.
This product requires three, size “AA” batteries (included).
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved. Printed in Italy
® and ™ designate U.S. trademarks of Mattel, Inc. 71298-0921
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 5 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.Or, write to:
Fisher-Price®Consumer Affairs, 636 Girard Avenue, East Aurora, New York 14052.
Page 2
Battery Replacement
1.5V x 3
“AA” (LR6)
Hint: To prevent scratching the toy’s decorated surfaces, place
the toy face down on a non-abrasive surface.
• Loosen the screw in the battery compartment door with a
Phillips screwdriver.
• Lift to open the battery compartment door.
• Remove the worn “AA”batteries and dispose of them properly.
• Insert three, new, size “AA” (LR6) alkaline batteries as indicated inside the battery compartment.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver.Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from this toy.
Battery leakage and corrosion can damage this toy.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery Replacement” instr uctions are to
be used.
• If removable rechargeable batteries are used, they are only
to be charged under adult supervision.
• Rechargeable batteries are to be removed from this toy before
they are charged.
• If you use a battery charger, it should be examined regularly
for damage to the cord, plug, enclosure and other parts.
Do not use a damaged battery charger until it has been
properly repaired.
Battery
Compartment
Door
Crib Activity Center
• Remove Sing-Along Puppy™from the crib for use on the floor.
Floor Activity Center
• Setup Sing-Along Puppy™as a walker that “barks” as baby
takes a walk!
Activity Walker
• Press the collar for lights, sounds and tunes!
IMPORTANT! Make sure the rear legs and the handle are in
the down position when using this toy in crib.
SHOWN ACTUAL SIZE
Page 3
Crib Activity Center Floor Activity Center
• For sound and lights, slide the power switch to the ON position.
• Position Sing-Along Puppy™inside the crib.
IMPORTANT! Make sure the rear legs and the handle are in the
down position when using this toy in crib.
• Wrap one of the attachment straps around the crib rail.
• Fasten the attachment strap slot onto the button on the back
of Sing-Along Puppy™.
• Repeat this procedure to attach the other attachment strap.
Note: Sing-Along Puppy™should be snug against the crib rail
and spindles. Use the attachment strap slot that provides the
tightest fit.
• Tie the strings on the bottom of Sing-Along Puppy™to a
crib spindle.
Note: It is better to tie the strings in a knot than a bow, since
a bow may be easily untied.
Hint: To prevent scratching the toy’s decorated surfaces, place
the toy face down on a non-abrasive surface.
• While pressing the leg release knob, lift the rear legs.
• Press the lower button and continue to lift the rear legs until
the handle and rear legs snap into place.
IMPORTANT! Push down on the rear legs to be sure they are
secured into position.
Hint: To fold the rear legs flat for storage, simply press the leg
release knob in while pushing the rear legs down.
1
1
1
1
2
2
Crib Rail
Spindles
Attachment Strap
Button
Power Switch
Lift Legs
Leg
Release
Knob
Lift Legs
2
2
• Insert the attachment straps through the slots in the back of
Sing-Along Puppy™.
• Insert the strings into the slot on the back of Sing-Along
Puppy™.
• For sound and lights, slide the power switch to the ON position.
Insert
Strings
Here
Power
Switch
Attachment
Straps
3
3
Lift Legs
Lift Legs
Button
Page 4
Activity Walker
Care
• This toy will also turn off automatically.
• Do not immerse this toy.Simply wipe the toy clean with a
damp cloth.
• If sound or light from/on this toy becomes faint, or if there
is no sound or light, remove the batteries and dispose of
them properly. Replace the batteries with three, size “AA”
(LR6) alkaline batteries.
• Press the lower button and continue to lift the rear legs until
the handle and rear legs snap into place.
IMPORTANT! Push down on the rear legs to be sure they are
secured into position.
Hint: To fold the rear legs flat for storage, simply press the leg
release knob in while pushing the rear legs down.
2
2
• The handle can be adjusted to the upper position for your
child’s comfort.
• While pressing the lower handle release button, pull the handle
up until it “snaps” into place.
• For sound and lights, slide the power switch to the ON position.
Hint: To lower the handle, press the upper handle release
button and push the handle down.
4
4
• Insert the attachment straps through the slots in the back of
Sing-Along Puppy™.
• Insert the strings into the slot on the back of Sing-Along Puppy™.
Insert
Strings
Here
Attachment Straps
3
3
Hint: To prevent scratching the toy’s decorated surfaces, place
the toy face down on a non-abrasive surface.
• While pressing the leg release knob, lift the rear legs.
1
1
Lift Legs
Lift Legs
Lift Legs
Leg
Release
Knob
Lift Legs
Lower Handle
Release Button
Upper Handle
Release Button
Power
Switch
FCC Note (United States Only)
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
If you have any questions about this product:In Canada, call 1-800-567-7724,
or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2. In Great Britain, telephone 01628 500303. In Australia,
Mattel Australia Pty.Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
Button
Loading...