Page 1
®
CONTENTS:
BLASTER
™
INSTRUCTIONS
Note: Carefully remove plane from package.
Keep these instructions for future reference
as they contain important information.
Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303.
© 2001 Mattel, Inc., El Segundo, CA 90245 U.S.A.
Mattel Australia Pty Ltd., Richmond, Victoria. 3121.
Consumer Advisory Service 1 800 800 812 (valid only in Australia).
Mattel East Asia Limited, 930 Ocean Centre, Harbour City, HK, China.
+
8
®
53508-0920 G1
Page 2
Attach Tail
To Plane
1. Carefully remove rear tail (by holding
connector piece).
2. Move tail to the very end and snap in
place.
LOAD
One time snap-on
1
Slingshotz Blaster™
tip.
4
Pull lower handle
all the way back
towards rear of
Blaster to draw
back plane.
LAUNCH ’EM UP
CORRECT
5
Point
skyward.
ANGLE
6
Press trigger to
launch the
Slingshotz plane.
2
3
Position
Slingshotz™
plane.
Load
interceptor
missiles.
Hold the handle all the
way back. The handle
DOES NOT LOCK in the
back position.
TRY TO BLAST ’EM DOWN
8
Point
towards
Push handle all
the way forward
and pull all the
way back, to
prepare missiles
for launch.
Hold the handle all the way back.
The handle DOES NOT LOCK in
the back position.
9
plane.
Wings open after
reaching
7
maximum height.
Mid-Air
Transformation
10
Press trigger to
fire missiles.
Page 3
RUBBER BAND REPLACEMENT
On Slingshotz Blaster™ tip.
MEDIUM
RUBBER BAND
(3 1/2 in.)
1
On Slingshotz™ plane.
LARGE
RUBBER BAND
(7in.)
SMALL
ADJUST TAIL FLAPS
If necessary, adjust tail flaps on
both sides for better performance.
RUBBER BAND
(7/8 in.)
2
MEDIUM
RUBBER BAND
(3 1/2 in.)
CAUTION: DO NOT aim towards
people or animals. DO NOT launch
plane or missiles at people or animals.
DO NOT pull launcher close to your
face when launching plane or missiles.
Use in an open area away from trees
and power lines. If plane gets caught in
an obstruction, DO NOT try to climb up
and release it yourself. Ask an adult for
assistance.
Mattel, Inc. warrants to the original consumer purchaser that this product will be
free of defects in material or workmanship for two years (unless specified in
alternate warranties) from the date of purchase. If defective, return the product
along with proof of the date of purchase, postage prepaid, to Consumer
Relations, 636 Girard Avenue, East Aurora, New York 14052 for replacement or
refund at our option. This warranty does not cover damage resulting from
unauthorized modification, accident, misuse or abuse. In no event shall we be
responsible for incidental, consequential, or contingent damages (except in
those states that do not allow this exclusion or limitation). Valid only in U.S.A.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. Some states do not allow the exclusion of
incidental or consequential damages, so the above exclusions or limitations may
not apply to you. Send only the product to the address above.
Send all correspondence to Consumer Relations, Mattel, Inc., 333
Continental Blvd., El Segundo, California 90245-5012 U.S.A. Or you may
phone us toll-free at 1-800-524-TOYS, Monday–Friday, 8:00 a.m.–6:00 p.m.
Eastern Time. Outside U.S.A., see telephone directory for Mattel listin
2-YEAR LIMITED WARRANTY
g.
CONSUMER INFORMATION
YOU CAN TELL IT’S MATTEL!™ Call us toll-free
or write with any comments or questions about
our products or service. Monday–Friday, 8:00
a.m–6:00 p.m. Eastern Time. Outside U.S.A., see
telephone directory for Mattel listing. Consumer
Relations, Mattel, Inc., 333 Continental Blvd., El
Segundo, CA 90245 U.S.A.
MATTY MATTEL™ toys
1 (800) 524-TOYS
CONFORMS TO THE SAFETY
REQUIREMENTS OF ASTM F963.
We are dedicated to quality products.
Loading...