33580-1920G1
ELECTRIC
RACING
The descriptions of the track pieces below do not appear on the track; they are for reference only. The part
number, as listed beside each track piece, does appear on each track piece. To lay out the set, match the
track pieces to the parts list below, then lay out the track by following the lettered diagram on reverse side.
Please retain this SpecSheet for future reference.
4 LANE
4 LANE
CLIFF HANGERS
CLIFF HANGERS
ELECTRIC RACING SET
®
CONTENTS
(B5829T)
A
(8) 9 in. Straight
(B5830T)
B
(14) 6 in. Straight
C
(10) 9 in. Radius Curve
(1/4 Circle)
(B5878)
H
(2) Cradle
(B5831)
(B5844)
F
(10) 12 in. Radius Curve
(1/8 Circle)
(B5846)
G
(6) 9 in. Radius Curve
(1/8 Circle)
(B5879Y)
H
(8) Transition
(B5831Y)
ACCESSORIESTRACK PIECES
(B631RES)
(B615EE)
(1) Track Clips (bag of 8)
(1) 120 Volt
Hi-Performance
X-2 Reverse Power Pak
(1) 120 Volt
Hi-Performance
X-2 Power Pak
(4) Plug-in
Racing
Controllers
T
(B7963)
(B631S)
(B7890)
(1) Sandpaper
(B7987)
SUPPORTS
1
(6) No.1 Supports
2
(7) No.2 Supports
3
(4) No.3 Supports
4
(B7806)
(B7807)
(B7808)
(B7809)
(B5832T)
D
(2) 9 in. Straight Terminal
(B5841Z)
E
(4) Straight Crossover Track
ALWAYS CLEAN TRACK AND TIRES BEFORE EACH RACE.
CAR MAINTENANCE TIP: When silicone rear tires get dirty, run them
over a piece of sticky tape to clean them.
I
(4) 9 in. Radius Curve
(1/4 Circle)
(B5838T)
J
(1) 15 in. Straight Track
(6) Flag Pole Sets
(22) Guardrails
4 Exotic Racers
(6) Label Sheets
(B796807A1)
(2) No.4 Supports
(B7810)
5
(1) No.5 Support