Fisher Labs F-Point Owner's Manual

5-YEAR LIMITED

WARRANTY

This product is warranted against defects in
materials and workmanship under normal use
for five years from the date of purchase to the
original owner. Liability in all events is limited to
the purchase price paid. Liability under this
Warranty is limited to replacement or repair, at
our option, of the product returned, shipping cost
prepaid, to Fisher Research Labs. Damage due
to neglect, accidental damage or misuse of this
product is not covered by the warranty.

Proof of purchase is required to make a claim under this warranty.

NOTE TO FOREIGN COUNTRY CUSTOMERS

This warranty may vary in other countries, check with

Factory warranty follows the channel of distribution.

Tel. [phone] Fax [phone]

your distributor for details.

Warranty does not cover shipping costs.

Fisher Research Labs.
1465-H Henry Brennan

El Paso, TX 79936

OWNERS

MANUAL

F-Point

For Treasure Hunting
and unearthing small
objects

After identifying the presence of a
metal object in the ground,
pinpointing its exact location, and
separating it from the earth, can be
frustrating and time consuming.

With the F-Point, retrieving coins
and other small metal objects is
easy.

Unearthing
Small Objects

A buried object, especially after
the passage of times, can be
indistinguishable from the soil it is
buried in. In addition, historical
objects will lose value if damaged in
the unearthing process.

It is therefore recommended to
use the F-Point in a probing or sifting
process. The tip of the F-Point will
detect a coin-sized metal object
approximately 3/4” to 1” away from
the tip of the probe. Probe the tip of
the F-Point directly into the ground;
poke around directly on the surface
in different areas until the internal
buzzer activates. If the earth is loose
enough, lift handfuls of soil out of the
ground and probe in the palm of your
hand with the F-Point.

Assembly

No Assembly Required

•

Operation

1.

Click On by rotating the knob clockwise.

2. Battery Check

The F-Point will buzz immediately, indicating
that the batteries are in good condition.
If the buzzer does not sound after switching
on, replace the single 9-volt battery.

3. Rotate the knob until the buzzer sound

stops.

4. Set the Sensitivity

A.

With the buzzer silent, rotate knob back

counterclockwise

device is just silent.

B.You want to position the knob in the most

counterclockwise position at which
the buzzer is still silent.

setting allows you to always set the
device at maximum sensitivity.

to the point where the

This threshold

PROBE

BATTERY

COMPARTMENT

ON/OFF KNOB