Instruction Manual Supplement
D104172X012
DVC6200p Digital Valve Controller
November 2017
Fisher™ FIELDVUE™ DVC6200p DTM with
PACTware 4.1
This document takes your through establishing a connection to PROFIBUS PA device DVC6200p in Pactware 4.1
through PROFIusb USB and the installation of the supported DTM.
Notes
The information found in this document can also be used to establish connections to FieldCare™ and FieldMate configuration
tools.
Refer to the DVC6200 Series Quick Start Guide, D103556X012
information and the DVC6200p Instruction Manual, D103563X012
valve controller, including product specifications, reference materials, custom setup information, maintenance procedures, and
replacement part details.
, for DVC6200p installation, connection, and initial configuration
, for all other information pertaining to the DVC6200p digital
DTM Supported:
DVC6200p_Profibus_DTM
Assumptions and Supported Environment:
The following software and hardware should be installed prior to launching the DVC6200p DTM in PACTware 4.1.
S. No System Version Reference Link
1 PD to PA Coupler (Pepperl and Fuchs)
2. PROFIusb USB
3. PROFIBUS CommDTM FROFIdtm PROFIbus DTM
4. Pactware 4.1 Ver 4.1
Compact PROFIBUS
Power Hub and Segment
Coupler KT-MB-GTB-2PS
H/W V1.03
Driver Ver. 5.45.11
http://www.pepperl-fuchs.u
s/usa/en/classid_1482.htm?
view=productdetails&prodid
=36114
Drivers included with
CD/DVD when purchased
PACTware 4.1 from
pepperl-fuchs
www.Fisher.com
DVC6200p Digital Valve Controller
November 2017
Instruction Manual Supplement
Profibus PA Device + DP/PA Coupler + PROFIusb USB + Pactware 4.1 +PROFIdtm
24V POWER
D104172X012
P&F
PROFIusb
DP/PA COUPLER
DEVICE (DVC6200p)
TEST PC
PACTware 4.1,
PROFIdtm 2.11
Note
Driver for PROFIusb should be installed and configured as shown in the figure below before launching the DTM.
2
Instruction Manual Supplement
D104172X012
DVC6200p Digital Valve Controller
November 2017
Installing the DTM
1. Download the DVC6200p_Profibus_DTM and exact the folder. Navigate to setup.exe in the extracted folder.
2. Right click on setup.exe and click Run as administrator from the context menu.
3. DVC6200p device DTM installation will start as shown in the figure below.
3
DVC6200p Digital Valve Controller
November 2017
4. Click Next as indicated below.
Instruction Manual Supplement
D104172X012
5. Accept the terms in the license agreement and click Next.
4
Instruction Manual Supplement
D104172X012
6. Select Complete and click Next to continue with the installation.
DVC6200p Digital Valve Controller
November 2017
7. Click Install to begin installation of the DVC6200p Device DTM.
5
Loading...