Fisher IM Supplement: CSA Hazardous Area Approvals - Fisher 582i Electro-Pneumatic Converter Manuals & Guides

Instruction Manual Supplement

D104319X012

582i Converter

August 2018

CSA Hazardous Area Approvals

™

Fisher

Hazardous Area Classifications and Special Instructions for “Safe
Use” and Installations in Hazardous Locations

Certain nameplates may carry more than one approval, and each approval may have unique installation/wiring
requirements and/or conditions of “safe use”. These special instructions for “safe use” are in addition to, and may
override, the standard installation procedures. Special instructions are listed by approval.

Note

This information supplements the nameplate markings affixed to the product and the 3582 and 3582i Positioners, 582i
Electro‐Pneumatic Converter, and 3583 Valve Stem Position Transmitter instruction manual (D200138X012

Emerson sales office

Always refer to the nameplate itself to identify the appropriate certification.
These Special Instructions for “Safe Use” and Installation in Hazardous Locations also apply to 3582i positioners.

582i Electro‐Pneumatic Converter

), available from your

or Local Business Partner, or at www.Fisher.com.

WARNING

Failure to follow these conditions of “safe use” could result in personal injury or property damage from fire or explosion, or
area re‐classification.

Intrinsically Safe, Explosion proof, Type n, Dust‐Ignition proof, Div 2

No special conditions for safe use.

Refer to table 1 for additional information.

Table 1. Hazardous Area Classifications

Certification

Body

Intrinsically Safe
Ex ia IIC T4/T5/T6 per drawing GE28591 (figure 1)
Ex ia Intrinsically Safe
Class I, II Division 1 GP A,B,C,D,E,F,G T4/T5/T6
per drawing GE28591 (figure 1)

Explosion Proof

CSA

1.These hazardous area classification also apply to 3582i positioners.

Ex d IIC T6
Class I, Division I, GP A,B,C,D T6

Type n
Ex nA IIC T6

Class I, Division 2, GP A,B,C,D T6
Class II, Division 1 GP E,F,G T6
Class II Division 2 GP F,G T6

(1)

Certification Obtained Entity Rating Temperature Code

Vmax = 30 VDC
Imax = 150 mA
Pi = 1.25 W
Ci = 0 nF
Li = 0 mH

- - - T6 (Tamb ≤ 71°C)

- - - T6 (Tamb ≤ 71°C)

- - - T6 (Tamb ≤ 71°C)

T4 (Tamb ≤ 71°C)
T5 (Tamb ≤ 62°C)
T6 (Tamb ≤ 47°C)

www.Fisher.com

582i Converter

August 2018

Figure 1. Loop Schematic (Installation drawing GE28591)

HAZARDOUS LOCATION NON-HAZARDOUS LOCATION

INTRINSIC SAFETY
CLASS I, II, III, DIV 1, GROUPS A,B,C,D,E,F,G

NON-INCENDIVE
CLASS I, DIV 2, GROUPS A,B,C,D

Instruction Manual Supplement

D104319X012

FISHER TYPE: 582i

Vmax = 30 Vdc
Imax = 150 mA
Ci = 0 nF
Li = 0 mH
Pi = 1.25 W

NOTES:

1. BARRIERS MUST BE CSA CERTIFIED WITH ENTITY PARAMETERS
 AND ARE TO BE INSTALLED IN ACCORDANCE WITH THE
 MANUFACTURER'S I.S. INSTALLATION INSTRUCTIONS.

2. EQUIPMENT SHALL BE INSTALLED IN ACCORDANCE WITH THE
 CANADIAN ELECTRICAL CODE, PART I.

3. FOR ENTITY INSTALLATION (I.S. AND N.I.): Vmax > Voc, Imax > Isc
 Ci + Ccable < Ca, Li + Lcable < La

GE28591 Rev A

CSA APPROVED BARRIER

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Fisher is a mark owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co. Emerson Automation Solutions,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.

Emerson Automation Solutions

Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore

www.Fisher.com

2

E 2018 Fisher Controls International LLC. All rights reserved.