Thomas Brandau
Vice President – Instrument Business Unit
Marshalltown, Iowa 50158
1-July-2022
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_22
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following products considered as,
Non-electrical instrumentation
(pneumatic – positioners, controllers, transmitters, volume boosters, and switches)
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_22
Page 2 of 2
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Non-electrical instrumentation – Group II Category 2 GD
Equipment is marked as follows:
Standards used: EN ISO 80079-36:2016, EN ISO 80079-37:2016, EN 1127-1:2019
The Technical Documentation has been submitted and retained by the Notified Body:
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
PED Directive – 2014/68/EU
Declaration of SEP
Models: Non-electrical instrumentation (pneumatic – positioners, controllers, transmitters, volume boosters, and switches)
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore, the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
II 2 G D TX X
Ex h IIC Tx x Gb
Ex h IIIC Tx x Db
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product;
Digital Level Controller
DLC3010
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President-Instrument Business Unit
30-Mar-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_26
Page 1 of 2
& Advanced Research
Marshalltown, Iowa 50158
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
EN61326-2-3:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU
Certificate – LCIE01ATEX6053X – Group II Category 1 GD – Intrinsically Safe & Dust
DLC3010
Ex ia IIC T5(Ta ≤ 80°C) Ga
Ex ia IIIC T83ºC(Ta ≤ 80°C) Da, IP66
Standards used: EN60079-0:2012 + A11:2013 and EN60079-11:2012
Certificate – LCIE01ATEX6054X – Group II Category 2 GD – Flameproof & Dust
DLC3010
Ex d IIC T5(Ta ≤ 80ºC) Gb
Ex tb IIIC T83°C(Ta ≤ 80°C) Db, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-1:2007 and EN60079-31:2009
Certificate – LCIE02ATEX6055X – Group II Category 3 GD – Type n & Dust
DLC3010
Ex nA IIC T5(Ta ≤ 80ºC) Gc
Ex tc IIIC T83°C(Ta ≤ 80ºC) Dc, IP66
Standards used: EN60079-0:2012 + A11: 2013, EN60079-15:2010 and EN60079-31:2009
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
(Applicable only if this mark appears on the product)
EDOCS ID: FCS_26
Page 2 of 2
Michael McCarty
Vice President – Instrument Business Unit
Marshalltown, Iowa 50158
30-November-2021
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_27
Page 1 of 3
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Digital Valve Controllers
DVC6005, DVC6005F, DVC6015, DVC6025, DVC6035
DVC6200, DVC6200S, DVC6200F, DVC6200FS, DVC6200P, DVC6200PS
DVC6205, DVC6205F, DVC6205P, DVC6215
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
& Advanced Research
EDOCS ID: FCS_27
Page 2 of 3
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
PED Directive – 2014/68/EU
Declaration of SEP
Models: DVC6005, DVC6005F, DVC6200, DVC6200S, DVC6200F, DVC6200FS, DVC6200P, DVC6200PS, DVC6205,
DVC6205F, DVC6205P
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – SIRA19ATEX1241X Group II Category 1 GD Intrinsically Safe, Dust
HART – HW2 without I/O Package
DVC6005, DVC6200, DVC6200S, DVC6205
Ex ia IIC T5(Ta ≤ 80ºC), T6(Ta ≤ 74ºC) Ga
DVC6005, DVC6200, DVC6200S, DVC6205
Ex ia IIIC T91ºC(Ta ≤ 80ºC) / T85ºC(Ta ≤ 74ºC) Da
HART – HW2 with I/O Package
DVC6005, DVC6200, DVC6200S, DVC6205
Ex ia IIC or IIB T5(Ta ≤ 80ºC), T6(Ta ≤ 61ºC) Ga
Ex ia IIIC T104ºC(Ta ≤ 80ºC) / T85ºC(Ta ≤ 61ºC) Da
FIELDBUS & PROFIBUS
DVC6005F, DVC6200F, DVC6200FS, DVC6200P, DVC6200PS, DVC6205F, DVC6205P
Ex ia IIC T4(Ta ≤ 80ºC), T5(Ta ≤ 77ºC), T6(Ta ≤ 62ºC) Ga
Ex ia IIIC T103ºC(Ta ≤ 80ºC) / T100ºC(Ta ≤ 77ºC) / T85ºC(Ta ≤ 62ºC) Da
FEEDBACK ASSEMBLY
DVC6015, DVC6025, DVC6035
Ex ia IIC T4(Ta ≤ 125ºC), T5(Ta ≤ 95ºC), T6(Ta ≤ 80ºC) Ga
Ex ia IIIC T146ºC(Ta ≤ 125ºC) / T135ºC(Ta ≤ 114ºC) / T100ºC(Ta ≤ 79ºC) / T85ºC(Ta ≤ 64ºC) Da
DVC6215 – Excludes Dust
Ex ia IIC T4(Ta ≤ 125ºC), T5(Ta ≤ 95ºC), T6(Ta ≤ 80ºC) Ga
Standards used: EN60079-0: 2012 + A11:2013, EN60079-11:2012
Standard EN 60079-0: 2012 and its amendment +A11: 2013 are no longer harmonized. A review of the major technical
changes laid out in harmonized standard EN IEC 60079-0: 2018 has been conducted showing that none of the major
technical changes affect the latest technical knowledge for the products listed above. (Ref IA_C.1.1)
EDOCS ID: FCS_27
Page 3 of 3
Certificate – SIRA19ATEX1241X Group II Category 2 GD Flameproof, Dust by Enclosure
DVC6005, DVC6005F, DVC6200, DVC6200F, DVC6200P, DVC6200S, DVC6200FS, DVC6200PS, DVC6205,
DVC6205F, DVC6205P
Ex db IIC T5(Ta ≤ 80ºC), T6(Ta ≤ 75ºC) Gb
DVC6015, DVC6025, DVC6035, DVC6215
Ex db IIC T4(Ta ≤ 125ºC), T5(Ta ≤ 95ºC), T6(Ta ≤ 80ºC) Gb
DVC6200, DVC6200S, DVC6200F, DVC6200FS, DVC6200P, DVC6200PS
Ex tb IIIC T88ºC Db
Standards used: EN60079-0:2012 + A11:2013, EN60079-1:2014, EN60079-31:2014
Certificate – SIRA19ATEX4242X Group II Category 3 G Type n
DVC6005, DVC6005F, DVC6200, DVC6200F, DVC6200P, DVC6200S, DVC6200FS, DVC6200PS, DVC6205,
DVC6205F, DVC6205P
Ex nC IIC T5(Ta ≤ 80ºC), T6(Ta ≤ 75ºC) Gc
DVC6015, DVC6025, DVC6035, DVC6215
Ex nA IIC T4(Ta ≤ 125ºC), T5(Ta ≤ 95ºC), T6(Ta ≤ 80ºC) Gc
Standards used: EN60079-0:2012 + A11:2013, EN60079-15:2010
Standard EN 60079-0: 2012 and its amendment +A11: 2013 are no longer harmonized. A review of the major technical
changes laid out in harmonized standard EN IEC 60079-0: 2018 has been conducted showing that none of the major
technical changes affect the latest technical knowledge for the products listed above. (Ref IA_C.1.1)
ATEX Notified Body for EC-Type Examination Certificate(s)
CSA Group Netherlands B.V. – Notified Body Number: 2813
Utrechtseweg 310, Building B42
6812AR Arnhem
The Netherlands
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
Michael McCarty
Vice President – Instrument Business Unit
Marshalltown, Iowa 50158
10-Dec-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_29
Page 1 of 3
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electro-pneumatic Converters
3622, 3722 582i
Electro-pneumatic Transducer
646
Electro-pneumatic Positioner
3661
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
& Advanced Research
EDOCS ID: FCS_29
Page 2 of 3
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
PED Directive – 2014/68/EU
Declaration of SEP
Models: 3622, 3722, 582i, 646, 3661
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE03ATEX6001X – Group II Category 1 GD – Intrinsically Safe & Dust
3622, 3722
Ex ia IIC T4(Ta ≤ 82°C), T5(Ta ≤ 62°C), T6(Ta ≤ 47°C) Ga
Ex ia IIIC T120ºC(Ta ≤ 82°C) / T100ºC(Ta ≤ 62°C) / T85ºC(Ta ≤ 47°C) Da, IP64
582i
Ex ia IIC T4(Ta ≤ 71°C), T5(Ta ≤ 62°C), T6(Ta ≤ 47°C) Ga
Ex ia IIIC T109ºC(Ta ≤ 71°C) / T100ºC(Ta ≤ 62°C) / T85ºC(Ta ≤ 47°C) Da, IP64
646
Ex ia IIC T4(Ta ≤ 71°C), T5(Ta ≤ 40°C) Ga
Ex ia IIIC T155ºC(Ta ≤ 71°C) / T124ºC(Ta ≤ 40°C) Da, IP64
3661 – Excludes Dust
Ex ia IIC T4(Ta ≤ 82°C), T5(Ta ≤ 62°C), T6(Ta ≤ 47°C) Ga
Standards used: EN60079-0:2012, EN60079-11:2012
Certificate – KEMA04ATEX2137X – Group II Category 2 GD – Flameproof & Dust
582i, 646
Ex d IIC T6(Ta ≤ 71ºC) Gb
Ex tb IIIC T74ºC(Ta ≤ 71ºC) Db
3622, 3722
Ex d IIC T5(Ta ≤ 82ºC) Gb
Ex tb IIIC T82ºC(Ta ≤ 79ºC) Db
Standards used: EN60079-0:2012, EN60079-1:2007, EN60079-31:2009
Note: The standards EN60079-1:2007 and EN60079-31:2009 are no longer harmonized. The requirements of these
standards have been checked against the harmonized standards EN60079-1:2014 and EN60079-31:2014 and there were
no major technical changes affecting the latest technical knowledge for the products listed above.
EDOCS ID: FCS_29
Page 3 of 3
Certificate – LCIE03ATEX6002X – Group II Category 3 GD – Type n & Dust
3622, 3722
Ex nA IIC T6(Ta ≤ 82°C) Gc
Ex tc IIIC T85ºC(Ta ≤ 82°C) Dc, IP64
582i
Ex nA IIC T6(Ta ≤ 71°C) Gc
Ex tc IIIC T85ºC(Ta ≤ 71°C) Dc, IP64
646
Ex nA IIC T6(Ta ≤ 71°C) Gc
Ex tc IIIC T85ºC(Ta ≤ 71°C) Dc, IP64
3661 – Excludes Dust
Ex nA IIC T6(Ta ≤ 82°C) Gc
Standards used: EN60079-0:2012, EN60079-15:2010, EN60079-31:2009
Note: The standard EN60079-31:2009 is no longer harmonized. The requirements of this standard have been checked
against the harmonized standard EN60079-31:2014 and there were no major technical changes affecting the latest
technical knowledge for the products listed above.
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Indu strie s E le c triques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
DEKRA Certification B.V. – Notified Body Number: 0344
Utrechtseweg 310
6812 AR Arnhem
P.O. Box 5185
6802 ED Arnhem
The Netherlands
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Position Transmitter
4210, 4211, 4221, 4215, 4220, 4221, 4222
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
3-August-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_30
Page 1 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE03ATEX6220X – Group II Category 1 GD – Intrinsically Safe & Dust
4211, 4221
Ex ia IIC T4(Ta ≤ 71ºC), T5(Ta ≤ 40ºC) Ga
Ex ia IIIC T106 ºC, Ex ia IIIC T75 ºC (Tamb ≤ +40ºC) Da
Ex ta IIIC T100ºC, T69ºC(Tamb ≤ +40ºC) Da, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-11:2012, EN60079-31:2014
Certificate – SIRA11ATEX1344 – Group II Category 2 GD – Flameproof & Dust
4210, 4211, 4212, 4215, 4220, 4221, 4222
Ex db IIC T5(Ta ≤ 71ºC), T6(Ta ≤ 56ºC) Gb
Ex tb IIIC T72ºC(-20°C ≤ Ta ≤ 56ºC) Db, IP66
Standards used: EN60079-0/A11:2013, EN60079-1:2014, EN60079-31:2014
Certificate – LCIE03ATEX6219 – Group II Category 3 GD – Type n & Dust
4211, 4221
Ex nA IIC T4Gc
Ex tc IIIC T81ºCDc, IP66
Standards used: EN60079-0:2012 + A11: 2013, EN60079-15:2010, EN60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
CSA Group Netherlands B.V. – Notified Body Number: 2813
Utrechtseweg 310, Building B42
6812AR Arnhem
The Netherlands
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EDOCS ID: FCS_30
Page 2 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electro-pneumatic Transducer
846
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
30-Mar-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_31
Page 1 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
PED Directive – 2014/68/EU
Declaration of SEP
Models: 846
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE03ATEX6298X – Group II Category 1 GD – Intrinsically Safe & Dust
846
Ex ia IIC T4(Ta ≤ 80ºC), T5(Ta ≤ 40ºC) Ga
Ex ia IIIC T90ºC(Ta ≤ 80ºC) / T50ºC(Ta ≤ 40ºC) Da, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-11:2012
Certificate – Baseefa05ATEX0130X – Group II Category 2 G – Flameproof
846
Ex db IIB T5(Ta ≤ 80ºC), T6(Ta ≤ 65ºC) Gb
Standards used: EN60079-0:2012 + A11:2013, EN60079-1:2014
Certificate – LCIE03ATEX6299 – Group II Category 3 GD – Type n & Dust
846
Ex nA IIC T5(Ta ≤ 85ºC). T6(Ta ≤ 74ºC) Gc
Ex tc IIIC T88ºC(Ta ≤ 85ºC) T
Standards used: EN60079-0:2012 +A11:2013, EN60079-15:2010, EN60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EDOCS ID: FCS_31
/ T77ºC(Ta ≤ 74ºC) T
500
500
Page 2 of 2
Dc, IP66
Thomas Brandau
Vice President – Instrument Business Unit
Marshalltown, Iowa 50158
1-July-2022
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_32
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Digital Valve Controller
DVC2000
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_32
Page 2 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
PED Directive – 2014/68/EU
Declaration of SEP
Models: DVC2000
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE05ATEX6009X – Group II Category 1 G – Intrinsically Safe
DVC2000
Ex ia IIC T4(Ta ≤ 80ºC), T5(Ta ≤ 40ºC) Ga
Standards used: EN60079-0:2012 + A11: 2013, EN60079-11:2012
Standard EN 60079-0: 2012 and its amendment +A11: 2013 are no longer harmonized. A review of the major
technical changes laid out in harmonized standard EN IEC 60079-0: 2018 has been conducted showing that none of the
major technical changes affect the latest technical knowledge for the products listed above. (Ref IA_C.2.1)
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electro-pneumatic Transducer
i2P-100
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
30-March-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_33
Page 1 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
PED Directive – 2014/68/EU
Declaration of SEP
Models: i2P-100
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE15ATEX3008X – Group II Category 1, 2 GD – Intrinsically Safe, Flameproof, & Dust
i2P-100
Ex ia IIC T3(Ta ≤ 85ºC), T4(Ta ≤ 81ºC), T5(Ta ≤ 46ºC) Ga
Ex ia IIIC T95ºC(Ta ≤ 85ºC) Da
Ex db IIC T5(Ta ≤ 85ºC), T6(Ta ≤ 69ºC) Gb
Ex tb IIIC T95ºC(Ta ≤ 85ºC) Db, IP64
Standards used: EN60079-0:2012 + A11:2013, EN60079-1:2014, EN60079-11:2012, EN60079-31:2014
Certificate – LCIE15ATEX1008 – Group II Category 3 GD – Type n & Dust
i2P-100
Ex nC IIC T5(Ta ≤ 85ºC), T6(Ta ≤ 69ºC) Gc
Ex tc IIIC T95ºC(Ta ≤ 85ºC) Dc, IP64
Standards used: EN60079-0:2012 + A11:2013, EN60079-15:2010, EN60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EDOCS ID: FCS_33
Page 2 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Local Control Panel
LCP100
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
30-Mar2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_36
Page 1 of 2
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – SIRA15ATEX2194X – Group II Category 1 G – Intrinsically Safe
LCP100
Ex ia IIB T4(Ta ≤ 65ºC) Ga
Standards used: EN60079-0:2012 + A11:2013, EN60079-11:2012, EN60079-26:2015
Certificate – SIRA08ATEX3335X – Group II Category 2 G – Increased Safety, Encapsulation, Intrinsically Safe
LCP100
Ex e mb [ib] IIC T4(Ta ≤ 65ºC) Gb, IP66
Standards used: EN60079-0:2012 +A11:2013, EN60079-7:2007, EN60079-11:2012, EN60079-18:2015
Certificate – SIRA12ATEX4216X – Group II Category 3 G – Intrinsically Safe
LCP100
Ex ic IIC T4(Ta ≤ 65ºC) Gc
Standards used: EN60079-0:2012 +A11:2013, EN60079-11:2012
ATEX Notified Body for EC-Type Examination Certificate(s)
SIRA Certification Services – Notified Body Number: 0518
Rake Lane, Eccleston
Chester CH4 9JN
United Kingdom
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EDOCS ID: FCS_36
Page 2 of 2
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
05-Aug-2021
Date
European Contact
Emerson Automation Solutions | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_37
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson Automation Solutions
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
On/Off
Wireless Position Monitor
Fisher 4320
4320 Battery Power with or without Pneumatic Output
4320 External Power with or without Pneumatic Output
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_37
Page 2 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
RED Directive – 2014/53/EU
All models
EN 300 328 V2.1.1, EN 301 489-1 V2.1.1:2017, EN 301 489-17 V3.1.1: 2017, EN 61000-6-2: 2005; EN 61000-6-3:
2007 + A1:2011; IEC 61010-1:2010
PED Directive – 2014/68/EU
Declaration of SEP
Models: 4320 – Battery Power with Pneumatic Output, 4320 – External Power with Pneumatic Output
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – SIRA 19ATEX2168X – Group II Category 1 G – Intrinsically Safe
4320 – Battery Power without Pneumatic Output
Ex ia IIC T3(-40°C ≤ Ta ≤ 85ºC), T4(-40°C ≤ Ta ≤ 75ºC), T5(-40°C ≤ Ta ≤ 40ºC) Ga
4320 – Battery Power with Pneumatic Output
Ex ia IIC T4(-20°C ≤ Ta ≤ 50ºC), T5(-20°C ≤ Ta ≤ 46ºC), T6(-20°C ≤ Ta ≤ 31ºC) Ga
4320 – External Power without Pneumatic Output
Ex ia IIC T5(-40°C ≤ Ta ≤ 80ºC) Ga
4320 – External Power with Pneumatic Output
Ex ia IIC T5(-20°C ≤ Ta ≤ 50ºC) Ga
Standards used: EN IEC 60079-0:2018, EN60079-11:2012
ATEX Notified Body for EC-Type Examination Certificate(s)
CSA Group Netherlands B.V. – Notified Body Number: 2813
Utrechtseweg 310, Building B42
6812AR Arnhem
The Netherlands
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product;
Digital Level Controller
DLC3020F
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President-Instrument Business Unit
30-Mar-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_38
Page 1 of 2
& Advanced Research
Marshalltown, Iowa 50158
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
EN61326-2-3:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU
Certificate – LCIE10ATEX3091X – Group II Category 1 GD – Intrinsically Safe & Dust
DLC3020F
Ex ia IIC T5(Ta ≤ 80°C), T6(Ta ≤ 73°C) Ga
Ex ia IIIC T87ºC(Ta ≤ 80°C) / T80ºC(Ta ≤ 73°C) Da, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-11:2012
Certificate – LCIE10ATEX3076 – Group II Category 2 GD – Flameproof & Dust
DLC3020F
Ex d IIC T5(Ta ≤ 80ºC), T6(Ta ≤ 73°C) Gb
Ex tb IIIC T87°C(Ta ≤ 80°C) / T80°C (Ta ≤ 73°C) Db, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-1:2007, EN60079-31:2014
Certificate – LCIE10ATEX1010 – Group II Category 3 GD – Type n & Dust
DLC3020F
Ex nA IIC T5(Ta ≤ 80°C), T6(Ta ≤ 73°C) Gc
Ex tc IIIC T87°C(Ta ≤ 80°C) / T80°C(Ta ≤ 73°C) Dc, IP66
Standards used: EN60079-0:2012 + A11:2013, EN60079-15:2010, EN60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
(Applicable only if this mark appears on the product)
EDOCS ID: FCS_38
Page 2 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electric Actuator
easy-Drive
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Bob Stahlin
Vice President-Sliding Stem Valve
Marshalltown, Iowa 50158
3-August-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_55
Page 1 of 2
Business Unit
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU
Certificate – SIRA12ATEX1168X – Group II Category 2 G – Flameproof
easy-Drive
Ex db IIA T6(Ta ≤ 70ºC) Gb
Standards used: EN60079-0:2012/A11:2013, EN60079-1:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
CSA Group Netherlands B.V. – Notified Body Number: 2813
Utrechtseweg 310, Building B42
6812AR Arnhem
The Netherlands
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
(Applicable only if this mark appears on the product)
EDOCS ID: FCS_55
Page 2 of 2
Joshua Wilford
Vice President/General Manager, North
America
Marshalltown, Iowa 50158
30-March-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_67
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electro-pneumatic Transducer
546, 546NS
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_67
Page 2 of 2
EMC Directive – 2014/30/EU
All models
EN 61326-1:2013
PED Directive – 2014/68/EU
Declaration of SEP
Models: 546, 546NS
The above equipment was designed and manufactured in accordance with Sound Engineering Practice (SEP) and is in
compliance with Article 4 paragraph 3 of the PED Directive. Therefore the equipment cannot bear the CE mark related to
PED compliance. However, the equipment may bear the CE mark to indicate compliance with other applicable EU Directives.
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
HART® Filter
HF340, HF341
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
20-March-2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_69
Page 1 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
EDOCS ID: FCS_69
Page 2 of 2
Michael McCarty
Vice President-Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
18 August 2021
Date
European Contact
Emerson Process Management | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_70
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Local Control Panel
LCP200
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_70
Page 2 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore, the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – FM17ATEX0071X – Group II Category 1 GD – Intrinsically Safe, Gas and Dust Environments
LCP200
Ex ia IIC T6(Ta ≤ 65ºC) Ga
Ex ia IIIC T85(Ta ≤ 65ºC) Da
When Installed Per GG55194
-40°C ≤ T
amb
≤ +65°C
IP66
Standards used: EN 60079-0:2018, EN 60079-11:2012, EN 60529:1991 + A1:2000 + A2:2013
Certificate – FM21ATEX0024X – Group II Category 2G 1D – Flameproof, Increased Safety, and Protection By Enclosure
Gas and Dust Environments
LCP200
II 2 G Ex db ia IIC T6 Gb
II 2 G Ex db ia IIB T6 Gb
II 2 G Ex eb ia mb IIC T6 Gb
II 1 D Ex ta IIIC T85°C Da
Ta = -40°C to +65°C
IP66
Standards used: EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015 + A1:2018, EN 60079-11:2012, EN
60079-18:2015 + A1:2017, EN 60079-31:2014, EN 60529:1991 + A1:2000 + A2:2013
ATEX Notified Body for EU-Type Examination Certificate(s)
FM Approvals Ltd. – Notified Body Number: 2809
One Georges Quay Plaza
Dublin, Ireland
DO2 E440
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
Michael McCarty
Vice President-Instrument Business Unit
& Advanced Research
Marshalltown, Iowa 50158
9-December-2021
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex France
EDOCS ID: FCS_71
Page 1 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Digital Level Controller
DLC3100
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EDOCS ID: FCS_71
Page 2 of 2
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore, the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – LCIE 19 ATEX 3012 X – Group II Category 2 GD – Flameproof and Dust
Ex db IIC T5(Ta ≤ 80ºC)/T6(Ta ≤ 55ºC) Gb
Ex tb IIIC T83(Ta ≤ 80ºC) Db
IP66
Standards used: EN IEC 60079-0:2018, EN 60079-1:2014, EN 60079-31:2014
Certificate – LCIE 19 ATEX 3013 X – Group II Category 1 GD – Intrinsic Safety and Dust
Ex ia IIC T5(Ta ≤ 80ºC)/T6(Ta ≤ 55ºC) Ga
Ex ia IIIC T100(Ta ≤ 80ºC)/ T85(Ta ≤ 55ºC) Da
Ex ia IIIC T
200
100°C Da (-40°C ≤ Ta ≤ +80°C)
Ex ia IIIC T
200
85°C Da (-40°C ≤ Ta ≤ +55°C)
IP66
Standards used: EN IEC 60079-0:2018, EN 60079-11:2012
Certificate – LCIE 19 ATEX 1007 X – Group II Category 3 GD – Type e and Dust
Ex ec IIC T5 (Ta ≤ 80ºC)/T6(Ta ≤ 55ºC) Gc
Ex tc IIIC T100(Ta ≤ 80ºC)/ T85(Ta ≤ 55ºC) Dc
IP66
Standards used: EN IEC 60079-0:2018, EN 60079-7:2015 + A1:2018, EN 60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
LCIE – Laboratoire Central des Industries Electriques – Notified Body Number: 0081
33 Avenue du General Leclerc BP 8
F92233 Fontenay-aux-Roses cedex
France
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
t
EU Declaration of Conformity
We, the manufacturer,
Emerson Automation Solutions
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Electronic Asset Tag
AMIT2000
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when
applicable or required, a European Community Notified Body certification, as shown in the attached
schedule.
Soon Peng Goh
Vice President-Sliding Stem Valve
Business Uni
16-May-2
Date
European Contact
Emerson Automation Solutions | Group Services SAS | Rue Paul-Baudry | B.P. 10150 | 68701 Cernay Cedex
France
EDOCS ID: FCS_72 Page 1 of 2
019
RoHS Directive – 2011/65/EU
Model: AMIT2000
RED Directive – 2014/53/EU
Model: AMIT2000
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – FM18ATEX0035X – Group II Category 1 G D – Intrinsically Safe
AMIT2000
Ex ia IIC T4( T
Ex ia IIIC T135°C Da
-40°C ≤ T
amb
Standards used: EN60079-0:2012 + A11:2013, EN60079-11:2012 and EN60529:1991 + A1:2000 + A2:2013
ATEX Notified Body for EC-Type Examination Certificate(s)
FM Approvals Ltd. – Notified Body Number: 1725
1 Windsor Dials, Windsor
Berkshire SL4 1RS
United Kingdom
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
≤ +85°C) Ga
amb
≤ +85°C
EDOCS ID: FCS_72 Page 2 of 2
EU Declaration of Conformity
We, the manufacturer,
Emerson
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
declare under our sole responsibility that the following product(s);
Proximity Switch
Type: GH04148 (Used in L2e)
to which this declaration relates, is in conformity with the provisions of the following European
Community Directives, including the latest amendments, as shown in the attached schedule.
Assumption of conformity is based on the application of the harmonized standards and, when applicable
or required, a European Community Notified Body certification, as shown in the attached schedule.
EMC Directive – 2014/30/EU
Models: All
EN 61326-1:2013
RoHS Directive – 2011/65/EU
Declaration of Exclusion
Models: All
The above equipment is excluded from the scope of this directive per Article 2, Paragraph 4, part C. Therefore the equipment
cannot bear the CE mark related to RoHS compliance. However, the equipment may bear the CE mark to indicate compliance
with other applicable EU directives.
Michael McCarty
Vice President – Instrument Business Unit
& Advanced Research – Marshalltown, IA
30-March2020
Date
European Contact
Emerson | Group Services SAS | Rue Paul-Baudry | B.P. 10 | 68701 Cernay Cedex France
EDOCS ID: FCS_73
Page 1 of 2
ATEX Directive – 2014/34/EU (Applicable only if this mark appears on the product)
Certificate – SIRA19ATEX1175X – Group II Category 2 GD – Flameproof & Dust
Ex db IIC T5/T6 Gb
Ex tb IIIC T87ºC Db
Ta = -40°C to 85°C, IP66
Standards used: EN60079-0:2018, EN60079-1:2014, EN60079-31:2014
ATEX Notified Body for EC-Type Examination Certificate(s)
SIRA Certification Service – Notified Body Number: 0518
Unit 6 Hawarden Industrial Park
Hawarden, CH5 3US
United Kingdom
ATEX Notified Body for Quality Assurance
SGS Fimko Oy – Notified Body Number: 0598
P.O. Box 30 (Särkiniementie 3)
Helsinki, 00211
Finland
EDOCS ID: FCS_73
Page 2 of 2
EMERSON
declare under our sole responsibility that the following products,
..
EU
Declaration
We, the manufacturer,
Fisher Controls International LLC
205 South Center Street
Marshalltown, Iowa 50158 USA
Valve, Valve Actuator, and/or Liquid Level Device
of
Emerson
Conformity
IS
to which this declaration relates, is in conformity with the provisions
European Community Directive:
ATEX
Assumption
of
conformity is based on the application
• EN ISO 80079-36 and -37
• EN 1127-1 (2019)
as described in our Technical Documentation
which has been submitted to and retained by Notified Body:
SGS Fimko Oy - Notified Body Number: 0598
P.O. Box 30 (Sarkiniementie 3)
Helsinki, 00211
Finland
following the provisions
This equipment is marked
CE@112GDTX
Valves, Valve Actuators, and/or Liquid Level Devices may be subject to the
Pressure Equipment Directive 2014/68/EU.
Refer to the documents included with this equipment for Declaration
Directive-2014/34/EU
of
the following harmonized standards:
of
the ATEX Directive 2014/34/EU.
as
follows:
Exh
UC
Ex
h IIIC Tx
of
the following
Tx
Gb
Db
of
Conformity, as applicable.
of
This unit may consist
to ATEX and other applicable European directives. Refer to the marking and documents included with
that equipment for Declaration
European Contact
Emerson
Group Services SAS
Rue Paul-Baudry
B.P.
10
68701 Cernay Cedex France
Deel ATEX
additional components (instrumentation, accessories, etc.) which may be subject
of
Conformity and proper application.
~
Vice President Business Units
EdMerwald
Date: 18-FEB-2022
Loading...