Fisher 8253, 2445 User Manual

349.37 Kb
Loading...

Replacement Parts for Sevice Sinks

2445 SERVICE SINK FAUCET

8250-3302 SUPPORT ROD

1792 ANGLE STOP WITH KEY

1790-1 ANGLE STOP W/ CROSS HANDLES

10049 (24”)

10006 (36”) SUPPLY LINE 1/2” M X 1/2”F

8250-2300 WALL FLANGE

8250-3300 ROD ADJUSTER

8253

 

 

SERVICE SINK FAUCET

 

 

 

2000-7500

 

 

SCREW

 

 

2000-8000

 

 

RED BUTTON

 

 

AND

 

 

2000-8001

 

 

BLUE BUTTON

 

 

2000-2301

 

 

LEVER HANDLE

 

 

2000-3002

 

 

BIBB CAP

 

2400-2103

10464

2000-0004

DUCK GASKET

RH CHECK STEM

ELBOWS

 

REPAIR KIT

 

2000-5000

OR

 

WASHER

2000-0005

 

 

LH CHECK STEM

 

2000-3405

REPAIR KIT

 

 

 

LH CHECK STEM

 

 

OR

 

2200-0000

2000-3407

 

NIPPLE KIT

RH CHECK STEM

 

 

2000-6000

 

 

SPRING

 

 

2000-0001

 

2902-7402

RETAINER

 

ASSEMBLY

 

WALL BRACKET

 

 

 

SCREW

10456

 

 

 

8254-7000

LUBE

 

 

 

SCREW

 

 

3990-8001

34673

 

29203

EZ INSTALL KIT

EZ INSTALL KIT

VACUUM BREAKER

FOR CHICAGO

FOR T&S

REPAIR KIT FOR

 

 

 

1/2” NPT

 

 

 

 

3200-2306

3200-2307

2200-5000

 

ECCENTRIC

1/2” ECCENTRICS

ECCENTRIC

 

FLANGES

 

GASKETS

 

MANFACTURING COMPANY

 

 

PO BOX 60, TULARE, CA 93275

 

 

(800)421-6162, FAX: (800)832-8238

 

PART NO. 40665

www.fisher-mfg.com

REV. A

fisher manufacturing company

Stainless Steel Covered Reel Rinse

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install

the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual field situations under extreme

conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of

the warranty claim. This warranty does not cover external finish (except at date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.

A full and complete copy of our One Year limited warranty is available upon request.

#8253 - Service Sink Faucet: Long Spout with Wall Bracket, Vacuum Breaker, Polished Chrome

#2445 - Service Sink Faucet: Short Spout, Vacuum Breaker, Polished Chrome

KEEP THIS MANUAL FOR FUTURE REFERENCE

ANSI/A112.18.1M, ANSI/NSF 61.9

fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238

www.fisher-mfg.com

Installation Instructions for Pre-Rinse Units

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION

Installation Notes:

Be sure to shut off water supply before beginning.

Use pipe thread sealant such as PST on all threaded joints.

Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

• Medium Sized Crescent Wrench

 

Pipe Thread Sealant

 

Phillips Screwdriver

PST

7/16” Drill Bit

 

Installation Instructions

READ BEFORE INSTALLATION:

Before removing any existing T&S, Chicago, CHG, or Dormont hardware, read the instructions on next page labeled “EZ Install Adapter Instructions”

1.Insert the eccentric gasket into the groove on the eccentric. Making sure gasket is in place, loosely mount the eccentric and flange onto the control valve body.

2.Mount control valve body to either a wall with male supply nipples, or a backsplash with nipples (not included). Be sure to use pipe thread sealant on the supply nipple threads. Adjust the eccentrics as needed in order to mount the control valve level. Once level, tighten the eccentrics.

3.To install the wall bracket, first attach the rod adjuster to the rod. Do not completely screw the adjuster onto the rod in case some future adjustment is necessary. Using one of the small

screws, attach the rod adjuster to the faucet spout. Attach the other end of the rod to the wall bracket flange using the other small screw. To complete wall bracket installation, attach the flange to the wall or backsplash using the longer wall screws.

Step 2

1/2” NPT Supply Nipples (not included)

Step 1

Gasket

Eccentric

Flange

Wall Flange

Step 3

Screw

Rod

Installation Instructions Continued

EZ Install Adapter Instructions

If replacing T&S, Chicago, CHG, or Dormont Faucets, use the EZ Install Adapter that is included with your Fisher faucet to simplify installation.

1.Remove existing faucet by unthreading connecting nut.

2.Place new washer into fitting. Thread in Fisher EZ Install Adapter.

3.Using another new washer, mount the new Fisher faucet onto the EZ Install Adapter and tighten. Discard the eccentrics supplied with new Fisher faucets.

Step 1

Step 2

Remove Old

Control Valve

Step 3

Fisher Washer

 

7-3/4"-8-1/4"

 

 

[196.9mm-209.6mm]

 

 

1/2” Nipple Kit

EZ Install

 

Adapter

 

(optional)

 

 

Elbows

Rod

 

(optional)

 

Adjuster

 

 

Ø7/8”

7-3/4"-8-1/4"

New Fisher

[196.9mm-209.6mm]

Faucet

 

 

Screw

Fisher Washer

EZ Install

Adapter