Fisher 75019 PARTS LIST
8250-3302
SUPPORT ROD
Replacement Parts for Sevice Sinks
2445
SERVICE SINK FAUCET
1790-1
ANGLE STOP
W/ CROSS
HANDLES
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2”F
8250-2300
WALL FLANGE
8250-3300
ROD ADJUSTER
1792
ANGLE STOP
WITH KEY
2400-2103
ELBOWS
2200-0000
NIPPLE KIT
2902-7402
WALL BRACKET
SCREW
8254-7000
SCREW
8253
SERVICE SINK FAUCET
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
2000-3405
LH CHECK STEM
OR
2000-3407
RH CHECK STEM
2000-6000
SPRING
2000-0001
RETAINER
ASSEMBLY
10456
LUBE
2000-0004
RH CHECK STEM
REPAIR KIT
OR
2000-0005
LH CHECK STEM
REPAIR KIT
fisher manufacturing company
Service Sink Faucet
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in
both our modern in-house testing center and in actual
fi eld situations under extreme conditions. Every detail
is thoroughly checked. Before we make our products
available to you, they pass each and every test. You get
proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products and
parts thereof (except as noted below) against defects in
materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company.
All transportation and insurance charges for shipping the
product to and from Fisher Manufacturing Company must
be borne by you. Charges for transportation and insurance
may, at the option of Fisher Manufacturing Company,
be refunded depending upon our investigation of the
warranty claim. This warranty does not cover external
fi nish (except at date of original purchase) or labor costs
not specifi cally authorized by Fisher Manufacturing
Company.
#8253 - Service Sink Faucet: Long Spout with Wall
Bracket, Vacuum Breaker, Polished Chrome
#2445 - Service Sink Faucet: Short Spout, Vacuum
Breaker, Polished Chrome
PART NO. 40665
3990-8001
VACUUM BREAKER
REPAIR KIT FOR
1/2” NPT
34673
EZ INSTALL KIT
FOR CHICAGO
3200-2306
ECCENTRIC
FLANGES
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
EZ INSTALL KIT
3200-2307
1/2” ECCENTRICS
29203
FOR T&S
2200-5000
ECCENTRIC
GASKETS
REV. A
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Service Sinks
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
• Phillips Screwdriver
• 7/16” Drill Bit
PST
Installation Instructions Continued
EZ Install Adapter Instructions
If replacing T&S, Chicago, CHG, or Dormont Faucets, use the EZ
Install Adapter that is included with your Fisher faucet to simplify
installation.
1. Remove existing faucet by unthreading connecting nut.
2. Place new washer into fi tting. Thread in Fisher EZ Install
Adapter.
3. Using another new washer, mount the new Fisher faucet onto
the EZ Install Adapter and tighten. Discard the eccentrics
supplied with new Fisher faucets.
Installation Instructions
READ BEFORE INSTALLATION:
Before removing any existing T&S, Chicago, CHG,
or Dormont hardware, read the instructions on next
page labeled “EZ Install Adapter Instructions”
1. Insert the eccentric gasket into the groove on the
eccentric. Making sure gasket is in place, loosely
mount the eccentric and fl ange onto the control
valve body.
2. Mount control valve body to either a wall with male
supply nipples, or a backsplash with nipples (not
included). Be sure to use pipe thread sealant on
the supply nipple threads. Adjust the eccentrics as
needed in order to mount the control valve level.
Once level, tighten the eccentrics.
3. To install the wall bracket, fi rst attach the rod
adjuster to the rod. Do not completely screw
the adjuster onto the rod in case some future
adjustment is necessary. Using one of the small
screws, attach the rod adjuster to the faucet spout.
Attach the other end of the rod to the wall bracket
fl ange using the other small screw. To complete wall
bracket installation, attach the fl ange to the wall or
backsplash using the longer wall screws.
Step 2 Step 3
1/2” NPT Supply
Nipples (not included)
Step 1
Gasket
Wall Flange
Rod
Eccentric
Flange
Screw
Step 3
Step 2Step 1
Fisher Washer
Remove Old
Control Valve
EZ Install
Adapter
Fisher Washer
Ø7/8”
7-3/4"-8-1/4"
[196.9mm-209.6mm]
1/2” Nipple Kit
7-3/4"-8-1/4"
[196.9mm-209.6mm]
(optional)
Elbows
(optional)
EZ Install
Adapter
Rod
Adjuster
New Fisher
Faucet
Screw
Loading...