Page 1
FISHER MANUFACTURING COMPANY
Stainless Steel Single Deck Faucets
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to
a strict dedication of overall value. When you install
Fisher products… you install the best. Our hardware
is manufactured with the standardization of internal
mechanisms. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual field situations under extreme conditions. Every detail is thoroughly checked. Before we
make our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects in materials or workmanship for a period of one
year after the date of original purchase. During this
period Fisher Manufacturing Company will replace a
defective product or part without charge to you, provided that the entire product is delivered to Fisher
Manufacturing Company. All transportation and insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external finish (except at
date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is available upon request.
Lever Handles
58009 - Single Deck Faucet with 6” Swing Spout
58017 - Single Deck Faucet with 8” Swing Spout
58025 - Single Deck Faucet with 10” Swing Spout
58033 - Single Deck Faucet with 12” Swing Spout
58041 - Single Deck Faucet with 14” Swing Spout
58068 - Single Deck Faucet with 16” Swing Spout
Wrist Handles
58181 - Single Deck Faucet with 6” Swing Spout
58203 - Single Deck Faucet with 8” Swing Spout
58211 - Single Deck Faucet with 10” Swing Spout
58238 - Single Deck Faucet with 12” Swing Spout
58246 - Single Deck Faucet with 14” Swing Spout
58254 - Single Deck Faucet with 16” Swing Spout
MANUFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
Part No. - 43613 REV
www.fisher-mfg.com
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
ANSI/A112.18.1M, ANSI/NSF 61.
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
www.noleadfaucet.com
.A
9
Page 2
Installation Instructions for Stainless Steel Single Deck Mount Faucet
Swivel/Rigid Gooseneck Spout Installation Instructions
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING
JURISDICTION REGARDING BACKFLOW PREVENTION.
Installation Notes:
• Be sure water supply is shut-off before beginning.
• Use pipe thread sealant on all threaded joints such as PST or Teflon tape.
• Check the packaging for missing items BEFORE beginning installation. If
items are missing, contact your supplier.
Items needed for Installation:
• 1 - Medium Sized Crescent Wrenches
• 1 - Plumbers Tape or Pipe Thread Sealant
Single Deck Installation Instructions
Step 1.
Mount control valve on deck by inserting the nipple through a pre-drilled 7/8”
hole in deck. Apply thread sealant to the nipple and attach slip joint kit. Tighten
until control valve is secure.
Step 1
Step 1.
Installing a swivel spout, apply lube to the o-rings on the gooseneck spout. Make
sure the white snap ring is in place before mounting the spout. Mount the spout
and tighten the gooseneck spout nut onto the faucet spout outlet.
Step 2.
Insert serrated washer into the spout outlet to Install a rigid spout, Then see step
1 to complete the installation
Step 3.
Turn on water supply and check for leaks.
Step 2 & 3
Swivel Gooseneck Spout
Thread Sealant
Goes Here
Slip Joint Kit
Apply O-Ring
Lube Here
Insert Serrated
Washer for Rigid
Installation
Loading...