Fisher 53317 Parts Manual

3

FISHER MANUFACTURING COMPANY

Stainless Steel Single Wall Faucets

Product Installation Guide

Swivel Swing

Spout

Apply O-Ring
Lube

4

Since 1936, Fisher Manufacturing Company has man­ufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has ad­hered to a strict dedication of overall value. When
you install Fisher products… you install the best.
Our hardware is manufactured with the standard­ization of internal mechanisms. Every piece of
equipment we make is rigorously tested in both
our modern in-house testing center and in actual
field situations under extreme conditions. Every
detail is thoroughly checked. Before we make our
products available to you, they pass each and ev­ery test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its prod­ucts and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will re­place a defective product or part without charge to
you, provided that the entire product is delivered
to Fisher Manufacturing Company. All transporta­tion and insurance charges for shipping the prod­uct to and from Fisher Manufacturing Company
must be borne by you. Charges for transportation
and insurance may, at the option of Fisher Manu­facturing Company, be refunded depending upon
our investigation of the warranty claim. This war­ranty does not cover external finish (except at date
of original purchase) or labor costs not specifi­cally authorized by Fisher Manufacturing Company.

Lever Handles

53287 - Single Wall with 6” Swing Spout
53295 - Single Wall with 8” Swing Spout
53309 - Single Wall with 10” Swing Spout
53317 - Single Wall with 12” Swing Spout
53325 - Single Wall with 14” Swing Spout
53333 - Single Wall with 16” Swing Spout

Wrist Handles

58769 - Single Wall with 6” Swing Spout
58777 - Single Wall with 8” Swing Spout
58785 - Single Wall with 10” Swing Spout
58793 - Single Wall with 12” Swing Spout
58807 - Single Wall with 14” Swing Spout
58815 - Single Wall with 16” Swing Spout

MANUFACTURING COMPANY

PO BOX 60, TULARE, CA 93275

Part No. - 43605 REV

[phone], FAX: [phone]

www.fisher-mfg.com

A full and complete copy of our One Year limited
warranty is available upon request.

WARNING:

Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical

Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”

ANSI/A112.18.1M, ANSI/NSF 61.

FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:[phone]

www.noleadfaucet.com

.A

9

Installation Instructions for Stainless Steel Single Wall Faucet

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING
JURISDICTION REGARDING BACKFLOW PREVENTION.

Installation Notes:

• Be sure water supply is shut-off before beginning.

• Use pipe thread sealant on all threaded joints such as PST or Teflon tape.

• Check the packaging for missing items BEFORE beginning installation. If
items are missing, contact your supplier.

Items needed for Installation:

• 1 - Medium Sized Crescent Wrenches

• 1 - Plumbers Tape or Pipe Thread Sealant

Single Wall Installation Instructions

Installation Instructions

1. Mount control valve body to either a wall with male supply nipples or a
backsplash with nipples (not included). Be sure to use pipe thread sealant
on the nipple threads.

2. If installing a double joint spout, apply lube to the o-rings on the spout.

Mount the double joint spout and tighten the nut onto the faucet spout
outlet.

3. Apply lube to the o-rings on the swing spout. Make sure the white snap

ring is in place before mounting the swing spout. Mount the swing spout
and tighten the swing spout nut onto the faucet spout outlet.

1

1/2” Nipple

(Optional)

2

1/2” NPT Supply Nipples

(Not Included)

1/2” NPT Supply Lines

(Optional)

Ø 7/8” Hole

1/2” Elbows

(Optional)

4. Turn on water supply and check for leaks.

Double Joint Spout

Apply O-Ring
Lube