Fisher 53287 Parts Manual
3
FISHER MANUFACTURING COMPANY
Stainless Steel Single Wall Faucets
Product Installation Guide
Swivel Swing
Spout
Apply O-Ring
Lube
4
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to a strict dedication of overall value. When
you install Fisher products… you install the best.
Our hardware is manufactured with the standardization of internal mechanisms. Every piece of
equipment we make is rigorously tested in both
our modern in-house testing center and in actual
field situations under extreme conditions. Every
detail is thoroughly checked. Before we make our
products available to you, they pass each and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will replace a defective product or part without charge to
you, provided that the entire product is delivered
to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company
must be borne by you. Charges for transportation
and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon
our investigation of the warranty claim. This warranty does not cover external finish (except at date
of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.
Lever Handles
53287 - Single Wall with 6” Swing Spout
53295 - Single Wall with 8” Swing Spout
53309 - Single Wall with 10” Swing Spout
53317 - Single Wall with 12” Swing Spout
53325 - Single Wall with 14” Swing Spout
53333 - Single Wall with 16” Swing Spout
Wrist Handles
58769 - Single Wall with 6” Swing Spout
58777 - Single Wall with 8” Swing Spout
58785 - Single Wall with 10” Swing Spout
58793 - Single Wall with 12” Swing Spout
58807 - Single Wall with 14” Swing Spout
58815 - Single Wall with 16” Swing Spout
MANUFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
Part No. - 43605 REV
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
ANSI/A112.18.1M, ANSI/NSF 61.
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
www.noleadfaucet.com
.A
9
Installation Instructions for Stainless Steel Single Wall Faucet
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING
JURISDICTION REGARDING BACKFLOW PREVENTION.
Installation Notes:
• Be sure water supply is shut-off before beginning.
• Use pipe thread sealant on all threaded joints such as PST or Teflon tape.
• Check the packaging for missing items BEFORE beginning installation. If
items are missing, contact your supplier.
Items needed for Installation:
• 1 - Medium Sized Crescent Wrenches
• 1 - Plumbers Tape or Pipe Thread Sealant
Single Wall Installation Instructions
Installation Instructions
1. Mount control valve body to either a wall with male supply nipples or a
backsplash with nipples (not included). Be sure to use pipe thread sealant
on the nipple threads.
2. If installing a double joint spout, apply lube to the o-rings on the spout.
Mount the double joint spout and tighten the nut onto the faucet spout
outlet.
3. Apply lube to the o-rings on the swing spout. Make sure the white snap
ring is in place before mounting the swing spout. Mount the swing spout
and tighten the swing spout nut onto the faucet spout outlet.
1
1/2” Nipple
(Optional)
2
1/2” NPT Supply Nipples
(Not Included)
1/2” NPT Supply Lines
(Optional)
Ø 7/8” Hole
1/2” Elbows
(Optional)
4. Turn on water supply and check for leaks.
Double Joint Spout
Apply O-Ring
Lube
Loading...