Replacement Parts for Single Wall Faucets
FISHER MANUFACTURING COMPANY
Stainless Steel 3/4” Single Wall Faucets
Product Installation Guide
5000-5003
SEAT WASHER
50970
CONTROL VALVE
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
RH SWIVEL STEM
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
2000-2301
56944
BIBB CAP
10464
2000-5000
WASHER
45853
OR
45845
1000-7502
SCREW
10456
LUBE
51403
RH SS SWIVEL
STEM REPAIR KIT
OR
51411
LH SS SWIVEL
STEM REPAIR KIT
54240
14” SWING SPOUT
54232
10” SWING SPOUT
77852
7” SWING SPOUT
54259
SS DOUBLE
JOINT SPOUT
10”
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to
a strict dedication of overall value. When you install
Fisher products… you install the best. Our hardware
is manufactured with the standardization of internal
mechanisms. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual fi eld situations under extreme con-
ditions. Every detail is thoroughly checked. Before we
make our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects in materials or workmanship for a period of one
year after the date of original purchase. During this
period Fisher Manufacturing Company will replace a
defective product or part without charge to you, provided that the entire product is delivered to Fisher
Manufacturing Company. All transportation and insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except
at date of original purchase) or labor costs not specifi -
cally authorized by Fisher Manufacturing Company.
Cross Handles
77380 - 3/4” Single Wall Faucet 7” Swing Spout
49417 - 3/4” Single Wall Faucet 10” Swing Spout
51349 - 3/4” Single Wall Faucet 14” Swing Spout
PART NO. 78034
10324
RH STEM ADAPTER
OR
10294
LH STEM ADAPTER
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
77925
3/4” ELBOW
REV. A
A full and complete copy of our One Year limited warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
ANSI/A112.18.1M, ANSI/NSF 61.
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
www.noleadfaucet.com
9
Installation Instructions for Single Wall Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing,
contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
Installation Instructions
1. Mount control valve body to either a wall with male supply nipples or a backsplash with nipples
(not included). Be sure to use pipe thread sealant on the nipple threads.
2. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
3. Apply lube to the o-rings on the swing spout. Mount the swing spout and tighten the swing
spout nut onto the faucet spout outlet.
4. Turn on water supply and check for leaks.
PST
Step 2
Double Joint Spout
Apply O-Ring
Lube Here
Step 3
Swing Spout
Apply O-Ring
Lube Here
Step 1
Washer and Locknut
Step 4
3/4” Elbows
Ø7/8”