Fisher 51306 Parts List

Replacement Parts for Single Wall Faucets

FISHER MANUFACTURING COMPANY

Stainless Steel 3/4” Single Wall Faucets

Product Installation Guide

5000-5003

SEAT WASHER

50970

CONTROL VALVE

BLUE BUTTON

LEVER HANDLE

DUCK GASKET

LH SWIVEL STEM

RH SWIVEL STEM

2000-7500

SCREW

2000-8000

RED BUTTON

AND

2000-8001

2000-2301

56944

BIBB CAP

10464

2000-5000

WASHER

45853

OR

45845

1000-7502

SCREW

10456

LUBE

51403

RH SS SWIVEL

STEM REPAIR KIT

OR

51411

LH SS SWIVEL

STEM REPAIR KIT

54240

14” SWING SPOUT

54232

10” SWING SPOUT

77852

7” SWING SPOUT

54259

SS DOUBLE

JOINT SPOUT

10”

Since 1936, Fisher Manufacturing Company has manu­factured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to
a strict dedication of overall value. When you install
Fisher products… you install the best. Our hardware
is manufactured with the standardization of internal
mechanisms. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual fi eld situations under extreme con-
ditions. Every detail is thoroughly checked. Before we
make our products available to you, they pass each and
every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against de­fects in materials or workmanship for a period of one
year after the date of original purchase. During this
period Fisher Manufacturing Company will replace a
defective product or part without charge to you, pro­vided that the entire product is delivered to Fisher
Manufacturing Company. All transportation and in­surance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except
at date of original purchase) or labor costs not specifi -
cally authorized by Fisher Manufacturing Company.

Cross Handles
77380 - 3/4” Single Wall Faucet 7” Swing Spout

49417 - 3/4” Single Wall Faucet 10” Swing Spout
51349 - 3/4” Single Wall Faucet 14” Swing Spout

PART NO. 78034

10324

RH STEM ADAPTER

OR

10294

LH STEM ADAPTER

MANFACTURING COMPANY

PO BOX 60, TULARE, CA 93275

[phone], FAX: [phone]

www.fisher-mfg.com

77925

3/4” ELBOW

REV. A

A full and complete copy of our One Year limited war­ranty is available upon request.

WARNING:

Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical

Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”

ANSI/A112.18.1M, ANSI/NSF 61.

FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:[phone]

www.noleadfaucet.com

9

Installation Instructions for Single Wall Faucets

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION

Installation Instructions Continued

Installation Notes:

• Be sure to shut off water supply before beginning.

• Use pipe thread sealant such as PST on all threaded joints.

• Check the packaging for missing items BEFORE beginning installation. If items are missing,
contact your supplier.

Tools Required for Installation

• Medium Sized Crescent Wrench

• Pipe Thread Sealant

Installation Instructions

1. Mount control valve body to either a wall with male supply nipples or a backsplash with nipples
(not included). Be sure to use pipe thread sealant on the nipple threads.

2. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.

3. Apply lube to the o-rings on the swing spout. Mount the swing spout and tighten the swing
spout nut onto the faucet spout outlet.

4. Turn on water supply and check for leaks.

PST

Step 2

Double Joint Spout

Apply O-Ring

Lube Here

Step 3

Swing Spout

Apply O-Ring

Lube Here

Step 1

Washer and Locknut

Step 4

3/4” Elbows

Ø7/8”