Fisher 51217 PARTS LIST
Replacement Parts for Deck Mount Faucets
FISHER MANUFACTURING COMPANY
Stainless Steel 3/4” 8” Deck Mount Faucets
Product Installation Guide
5000-5003
SEAT WASHER
49964
CONTROL VALVE
RED BUTTON
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
RH SWIVEL STEM
10324
RH STEM ADAPTER
OR
10294
LH STEM ADAPTER
2000-7500
SCREW
2000-8000
AND
2000-8001
2000-2301
56944
BIBB CAP
10464
2000-5000
WASHER
45853
OR
45845
1000-7502
SCREW
10456
LUBE
51403
RH SS SWIVEL
STEM REPAIR KIT
OR
51411
LH SS SWIVEL
STEM REPAIR KIT
54240
14” SWING SPOUT
54232
10” SWING SPOUT
77852
7” SWING SPOUT
54259
SS DOUBLE
JOINT SPOUT
10”
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products
and hardware specialties for the food service industry.
For three generations, the Fisher family has adhered to
a strict dedication of overall value. When you install
Fisher products… you install the best. Our hardware
is manufactured with the standardization of internal
mechanisms. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual fi eld situations under extreme con-
ditions. Every detail is thoroughly checked. Before we
make our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects in materials or workmanship for a period of one
year after the date of original purchase. During this
period Fisher Manufacturing Company will replace a
defective product or part without charge to you, provided that the entire product is delivered to Fisher
Manufacturing Company. All transportation and insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except
at date of original purchase) or labor costs not specifi -
cally authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is available upon request.
Lever Handles
77631 - 3/4” 8” Deck Mount Faucet 7” Swing Spout
60143 - 3/4” 8” Deck Mount Faucet 10” Swing Spout
51217 - 3/4” 8” Deck Mount Faucet 14” Swing Spout
Wrist Handles
77666 - 3/4” 8” Deck Mount Faucet 7” Swing Spout
60313 - 3/4” 8” Deck Mount Faucet 10” Swing Spout
51241 - 3/4” 8” Deck Mount Faucet 14” Swing Spout
PART NO. 78131
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
ANSI/A112.18.1M, ANSI/NSF 61.
FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238
www.noleadfaucet.com
Installation Instructions for Deck Mount Faucets
Installation Instructions Continued
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing,
contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
Installation Instructions
1. Mount control valve on deck by inserting nipples through pre-drilled 1-3/4” holes in deck.
Place washer and hex nut on nipples, tighten until control valve is secure. Apply thread
sealant to both nipples and connect water supply
2. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
4. Apply lube to the o-rings on the swing spout. Make sure the white snap ring is in place before
mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the
faucet spout outlet.
5. Turn on water supply and check for leaks.
PST
Double Joint Spout
Step 2
Apply O-Ring
Lube Here
Swing Spout
Step 3
Apply O-Ring
Lube Here
Step 1
Step 4
Nipple
Washer
Hex Nut
Loading...