Fisher 51179 Parts Manual
Replacement Parts for Backsplash Faucets
fisher manufacturing company
73550
SEAT WASHER
T
O
H
H
O
T
CONTROL VALVE
49948
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
RH SWIVEL STEM
L
D
O
C
C
O
D
L
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
2000-2301
2000-3002
BIBB CAP
73657
73741
WASHER
18856
OR
18872
1000-7502
SCREW
73521
LUBE
51403
RH SWIVEL STEM
REPAIR KIT
OR
51411
LH SWIVEL STEM
REPAIR KIT
54240
14” SWING SPOUT
54232
10” SWING SPOUT
77852
7” SWING SPOUT
54259
DOUBLE JOINT
SPOUT 10”
FATB-8BS-KF
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in
both our modern in-house testing center and in actual
field situations under extreme conditions. Every detail
is thoroughly checked. Before we make our products
available to you, they pass each and every test. You get
proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external finish (except at
date of original purchase) or labor costs not specifically
authorized by Fisher Manufacturing Company.
#60100 - 3/4” Backsplash Faucet with 10” Swing
Spout
#51179 - 3/4” Backsplash Faucet with 14” Swing
Spout
PART NO. 74677
73570
RH STEM ADAPTER
OR
73569
LH STEM ADAPTER
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
77925
3/4” ELBOW
REV. A
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.sher-mfg.com
Installation Instructions for Backsplash Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
T
O
H
H
O
T
Control Valve
Qty: 1
L
D
O
C
C
O
D
L
Swing Spout
Length determined by model
Qty: 1
Each spout includes two
5000-5001 o-rings
5000-2103
3/4” Elbow
Qty: 2
73521
Lube
Qty: 1
Installation Instructions
1. Mount control valve body to the backsplash by inserting the nipples through the backsplash
and attaching washers and locknuts. Tighten the locknuts until the control valve is secure. Be
sure to use pipe thread sealant on the nipple threads. Attach elbows and make sure that there
are no leaks from back of sink.
2. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
3. Apply lube to the o-rings on the swing spout. Mount the swing spout and tighten the swing
spout nut onto the faucet spout outlet.
4. Turn on water supply and check for leaks.
Step 2
Step 3
Double Joint Spout
Apply O-Ring
Lube Here
T
O
H
H
O
T
Swing Spout
Apply O-Ring
Lube Here
T
O
H
H
O
T
L
D
O
C
C
O
D
L
L
D
O
C
C
O
D
L
Step 1
Ø7/8”
Washer and Locknut
8”
[203.2mm]
3/4” Elbows
Step 4
T
O
H
H
O
T
L
D
O
C
C
O
D
L
Loading...