Fisher 47775 Parts List
2000-5003
SEAT WASHER
PART NO. 73687
Replacement Parts for Deck Mount Faucets
3000-0003
DOUBLE JOINT
SPOUT 7 1/4”
OR
4000-0002
DOUBLE JOINT
3300
CONTROL VALVE
1792
ANGLE STOP
WITH KEY
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
3000-0010
LH SWIVEL STEM
OR
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
10456
LUBE
12564
2.2 GPM
AERATOR
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
1790-1
ANGLE STOP
W/ CROSS
HANDLES
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
16” SWING SPOUT
14” SWING SPOUT
12” SWING SPOUT
10” SWING SPOUT
8” SWING SPOUT
6” SWING SPOUT
15621
SPOUT NUT
2002
SNAP RING
1600-5000
SPOUT
O-RINGS
10456
LUBE
SWIVEL SPOUT
RETRO-FIT KIT
3967
3964
3963
3962
3961
3960
19119
SPOUT 13”
10014 (24”)
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
REV. A
fisher manufacturing company
8” C/C Deck Faucet
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food
service industry. For three generations, the Fisher
family has adhered to a strict dedication of and overall
value. When you install Fisher products… you install
the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome
plating is triple plated copper, nickel and chrome
for durability. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual fi eld situations under extreme
conditions. Every detail is thoroughly checked. Before
we make our products available to you, they pass
each and every test. You get proven performance.
Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge
to you, provided that the entire product is delivered
to Fisher Manufacturing Company. All transportation
and insurance charges for shipping the product to and
from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance
may, at the option of Fisher Manufacturing Company,
be refunded depending upon our investigation of
the warranty claim. This warranty does not cover
external fi nish (except at date of original purchase)
or labor costs not specifi cally authorized by Fisher
Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
#47732 - 8” C/C Deck Faucet with 6” Swing Spout and 7”
DJ Spout
#47740 - 8” C/C Deck Faucet with 8” Swing Spout and
7” DJ Spout
#47767 - 8” C/C Deck Faucet with 10” Swing Spout and
7” DJ Spout
#47775 - 8” C/C Deck Faucet with 12” Swing Spout and
7” DJ Spout
#47783 - 8” C/C Deck Faucet with 14” Swing Spout and
7” DJ Spout
#47791 - 8” C/C Deck Faucet with 16” Swing Spout and
7” DJ Spout
ANSI/A112.18.1M, ANSI/NSF 61.9
Installation Instructions for Deck Mount Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swing Spout
Length determined by model
Each spout includes one 2002 snap ring
Qty: 1
and two 1600-5000 o-rings
7” Double Joint Spout
Qty: 1
1000-8002
Slip Joint Kit
10456
Lube
Installation Instructions
1. Mount control valve on deck by inserting nipples through pre-drilled 7/8” holes in deck. Apply
thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.
2. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
4. Apply lube to the o-rings on the swing spout. Make sure the white snap ring is in place before
mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the
faucet spout outlet.
5. Turn on water supply and check for leaks.
Step 2
Step 3
Double Joint Spout
Apply O-Ring
Lube Here
Swing Spout
Apply O-Ring
Lube Here
Step 1
Step 4
Slip Joint Kit
Loading...