Page 1
fisher manufacturing company
Single Deck Faucet
Product Installation Guide
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
#3816 - Single Deck Base: 12” Rigid Gooseneck Spout
#1937- Single Deck Base: 6” Rigid Gooseneck Spout
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability.
Every piece of equipment we make is rigorously
tested in both our modern in-house testing center and
in actual fi eld situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except at
date of original purchase) or labor costs not specifi cally
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth Defects
Or Other Reproductive Harm.”
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
Replacement Parts for Single Deck Faucets
PART NO. 42900
REV. A
1792
ANGLE STOP
WITH KEY
1790-1
ANGLE STOP W/
CROSS HANDLES
10014 (24”)
10022 (36”)
SUPPLY LINE
1/2” F x 1/2” F
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M x 1/2” F
1000-8002
SLIP JOINT
KIT
3969
6” RIGID
GOOSENECK
SPOUT
3966
12” RIGID
GOOSENECK
SPOUT
2903
SINGLE DECK
BASE
RIGID
Page 2
PST
Installation Instructions for Deck Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
Installation Instructions
1. Mount single deck base on deck by inserting the nipple through a pre-drilled 7/8” hole in deck.
Apply thread sealant to the nipple and attach slip joint kit. Tighten until single deck base is
secure.
2. Apply thread sealant to threads on rigid gooseneck spout and insert into single deck base.
Tighten until secure.
3. Turn on water supply and check for leaks.
Step 1
Package Contents
The box should contain the following:
Rigid Gooseneck
Single Deck Base
Qty: 1
Rigid Gooseneck
Length determined by model
Qty: 1
10456
Lube
1000-8002
Slip Joint Kit
Qty: 1
Thread Sealant
Goes Here
Slip Joint Kit
Installation Instructions Continued
Step 2
Step 3
Apply Thread
Sealant Here
Loading...