Fisher 38091 Parts List

Replacement Parts for Pre-Rinse Units

2924-6000

SPRING

GOOSENECK

2925-6300

HOSE HOOK

70696

PIPE TO HOSE

ADAPTER

2902-12

WALL BRACKET

CONTROL

VALV E

PART NO. 78646

63363

SS 3/8” PIPE

21” RISER

2000-7500

SCREW

2000-8000

RED BUTTON

AND

2000-8001

BLUE BUTTON

2000-2301

LEVER HANDLE

2000-3002

BIBB CAP

10464

DUCK GASKET

2000-5000

WASHER

64424

LH CHECK STEM

64440

RH CHECK STEM

2000-6000

SPRING

2000-0001

RETAINER

ASSEMBLY

10456

LUBE

2914

STAINLESS STEEL

HOSE 36”

2922-5000

ASHER

2932-0002

WATTSN9 BACK-FLOW PREVENTER

BACKFLOW

PREVENTER

71390

INSULATED

HANDLE

71307

ULTRA SPRAY

VALV E

2949-9001

SCRUB BRUSH

10022 (36”)

SUPPLY LINE 1/2” F x 1/2” F

10006 (36”)

SUPPLY LINE 1/2” M x 1/2” F

3000-0000

RH SWIVEL REPAIR KIT

16” SWING SPOUT

54502

RH CHECK STEM

REPAIR KIT

54510

LH CHECK STEM

REPAIR KIT

14” SWING SPOUT

12” SWING SPOUT

10” SWING SPOUT

8” SWING SPOUT

6” SWING SPOUT

MANFACTURING COMPANY

PO BOX 60, TULARE, CA 93275

(800)421-6162, FAX: (800)832-8238

www.fisher-mfg.com

35572

NOZZLE FOR

71307 SPRAY

VALV E

2949-8600

CUP WASHER

1000-7502

SEAT SCREW

10456

LUBE

SEAT WASHER

54445

54429

54410

54402

54399

54380

RH SWIVEL

2000-5003

2949-9002

BLUE BUMPER

17337

STEM

2000-5000

WASHER

1000-5005

O-RING

2912-2501

2912-7501

2909-6000

12912

ANGLE STOP

WITH KEY

10464

DUCK GASKET

55867

2.2 GPM

AERATOR

2000-3002

BIBB CAP

1000-5003 WASHER

1000-7502 SCREW

12904

ANGLE STOP

W/ CROSS

HANDLES

2000-2301

LEVER HANDLE

2000-8000

RED BUTTON

2000-8001

BLUE BUTTON

2901-0000

ADD-ON CONTROL

VALVE LESS SPOUT

54763

SPOUT NUT

2002

SNAP RING

1600-5000

SPOUT

O-RINGS

10456

LUBE

SWIVEL SPOUT

RETRO-FIT KIT

7 14 2 0

SS SPRAY

VALV E

REPAIR KIT

64610

1000-5001

2912-6000

64580

INCLUDES:

2922-5000

64637

2909-5000

64653

2000-7500

SCREW

AND

19119

REV. A

fisher manufacturing company

Stainless Steel 4” Deck Pre-Rinse Unit

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual ﬁ eld situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external ﬁ nish (except at date of original purchase) or labor costs not speciﬁ cally authorized by Fisher Manufacturing Company.

A full and complete copy of our One Year limited warranty is available upon request.

WARNING:

Proposition 65 requires that we provide you with the following notice: “This product Contains A Chemical

Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.”

KEEP THIS MANUAL FOR FUTURE REFERENCE

FISHER MANUFACTURING COMPANY, TOLL FREE: 800-421-6162, FAX:800-832-8238

www.noleadfaucet.com

#53961 - Stainless Steel Pre-Rinse, Spring Style 4” Deck Control Valve, 21” Riser, 36” Hose & Spray Valve with Lever Handles

ANSI/A112.18.1M, ANSI/NSF 61.9

Installation Instructions for SS Pre-Rinse Units

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION

Installation Notes:

• Be sure to shut off water supply before beginning.

• Use pipe thread sealant such as PST on all threaded joints.

• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

• Medium Sized Crescent Wrenches

• Pipe Thread Sealant

• Phillips Screwdriver

• 7/16” Drill Bit

• 1/8” Allen Wrench

Installation Instructions

1. If no add-on faucet will be installed, proceed to step

2. If installing an add-on faucet, mount the small riser to the control valve body using thread sealant. Thread the add-on faucet to the other end of the small riser, again using thread sealant.

2. Mount control valve on deck by Inserting nipples through pre-drilled 7/8” holes in deck. Apply thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.

3. Mount the pipe to hose adapter to the enclosed riser using thread sealant. Mount the other end of the riser to the female outlet of the add-on body (if applicable), or the control valve body.

4. If no wall bracket is to be installed, proceed to Step 5, otherwise do the following:

a. Locate and drill a Ø7/16” hole in the wall directly

behind and about 3/4 the way up the riser pipe.

b. Loosely attach the front and back of the pipe

clamp onto the riser pipe.

c. Hold the wall bracket ﬂ ange against the wall,

centered with the hole. Use the wall screws and a screw driver to mount the ﬂ ange to the wall.

d. Slide part, but not all, of the wall bracket rod non-

threaded end ﬁ rst through the center hole of the ﬂ ange and into the wall.

e. Align the rod with the pipe clamp and thread the

rod into the pipe clamp. Be sure the rod is level by adjusting the pipe clamp position.

f. Once level, ﬁ x the rod in place by tightening both

the set screw located in the ﬂ ange and the pipe clamp screws.

5. Slip the hose hook over the pipe to hose adapter. Using thread sealant and a crescent wrench, thread the SS hose into the pipe to hose adapter.

6. Install gooseneck spring by slipping SS hose through the spring. Spring will ﬁ t over adapter which holds it in an upright position. Note: Be sure spring is installed as shown. DO NOT INSTALL SHORT BEND DOWN.

7. Fit one of the handle gaskets inside the outlet of the insulated handle and mount the spray valve onto it.

PST

Step 1

Thread Sealant

Goes Here

Step 2

Thread Sealant

Goes Here

Slip Joint Kit

Step 3

Thread Sealant

Goes Here

Installation Instructions Continued

8. Fit the other handle gasket inside the inlet of the insulated handle and mount the handle onto the SS hose. If installing backﬂ ow preventer, attach it between the SS hose and insulated handle. Be sure that gaskets are used on both sides of the backﬂ ow preventer.

9. If installing a brush, do so by pressing brush into the bumper of the spray valve until secure.

10. To install swing spout to add-on faucet, apply

o-ring lube to the o-rings on the swing spout. Make sure the white snap ring is in place before mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the add-on faucet spout outlet.

11. Turn on water supply and check for leaks.

Step 5 Step 6

Spring Bend

On This Side

Thread Sealant

Goes Here

Step 8 Step 9 Step 10 Step 11

Handle Gasket

WATTSN9 BACK-FLOW PREVENTER

Step 4

Excess Rod Length

Trim to Fit (optional)

Wall

Wall Screw

Set Screw

Pipe

Clamp

Riser Pipe

Step 7

Swing Spout

Apply O-Ring

Lube Here

Handle Gasket