Fisher 3526 PARTS LIST
2000-5003
SEAT WASHER
Replacement Parts for Deck Mount Faucets
2500
CONTROL VALVE
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
3000-0010
LH SWIVEL STEM
OR
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
10456
LUBE
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
3500
CONTROL VALVE
12564
2.2 GPM
AERATOR
12564
2.2 GPM
AERATOR
3968 (6”)
3965 (12”)
SWIVEL GOOSENECK
SPOUT
3969 (6”)
3966 (12”)
RIGID GOOSENECK
SPOUT
15621
SPOUT NUT
2002
SNAP RING
1600-5000
SPOUT O-RINGS
10456
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
fisher manufacturing company
4” C/C Deck Mount Gooseneck Faucet
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability.
Every piece of equipment we make is rigorously
tested in both our modern in-house testing center and
in actual fi eld situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except at
date of original purchase) or labor costs not specifi cally
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
#3515 - 4” c/c Deck Mount Faucet with 12” Swivel
Gooseneck Spout
#3516 - 4” c/c Deck Mount Faucet with 12” Rigid
Gooseneck Spout
#3525 - 4” c/c Deck Mount Faucet with 6” Swivel
Gooseneck Spout
#3526 - 4” c/c Deck Mount Faucet with 6” Rigid
Gooseneck Spout
1792
ANGLE STOP
WITH KEY
1790-1
ANGLE STOP
W/ CROSS
HANDLES
PART NO. 39276
10014 (24”)
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
1000-8002
SLIP JOINT KIT
REV. A
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Deck Mount Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swivel or Rigid Gooseneck Spout
Length determined by model
Swivel spout includes one 2002 snap ring
Qty: 1
and two 1600-5000 o-rings
1000-8002
Slip Joint Kit
Qty: (2)
10456
Lube
Installation Instructions
1. Mount control valve on deck by inserting nipples through pre-drilled 7/8” holes in deck. Apply
thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.
2a. If installing a rigid gooseneck spout, proceed to step 2b, otherwise apply lube to the o-rings
on the swivel gooseneck spout. Make sure the white snap ring is in place before mounting the
spout. Mount the spout and tighten the gooseneck spout nut onto the faucet spout outlet.
2b. If installing a rigid gooseneck spout, apply thread sealant to the spout and insert it into the
control valve body. Tighten and orient the spout as required.
3a/3b. Turn on water supply and check for leaks.
Step 2a
Step 3a
Apply O-Ring
Lube Here
Step 2b
Thread Sealant
Goes Here
Step 3b
Step 1
Thread Sealant
Goes Here
Slip Joints
Loading...