Fisher 3516 PARTS LIST

Replacement Parts for Deck Mount Faucets

	2500		3500
	CONTROL VALVE		CONTROL VALVE
	2000-7500
	SCREW
	2000-8000
	RED BUTTON		12564
	AND		2.2 GPM
	2000-8001		AERATOR
	BLUE BUTTON
	2000-2301
	LEVER HANDLE
	2000-3002
	BIBB CAP	3000-0000	3968 (6”)
		RH SWIVEL STEM
			3965 (12”)
	10464	REPAIR KIT
			SWIVEL GOOSENECK
	DUCK GASKET	OR
			SPOUT
		3000-0001
	2000-5000	LH SWIVEL STEM
	WASHER	REPAIR KIT	12564
			2.2 GPM
	3000-0010		AERATOR
	LH SWIVEL STEM
	OR
	3000-0011
	RH SWIVEL STEM
	2000-5003
	SEAT WASHER
	1000-7502		3969 (6”)
	SCREW
			3966 (12”)
			RIGID GOOSENECK
	10456		SPOUT
	LUBE
			10014 (24”)
	1792		10022 (36”)
			SUPPLY LINE
	ANGLE STOP
			1/2” F X 1/2” F
	WITH KEY

15621 SPOUT NUT

2002 SNAP RING

1600-5000 SPOUT O-RINGS

10456 LUBE

19119 SWIVEL SPOUT RETRO-FIT KIT

1790-1 ANGLE STOP W/ CROSS HANDLES

PART NO. 39276

10049 (24”)

10006 (36”) SUPPLY LINE 1/2” M X 1/2” F

MANFACTURING COMPANY PO BOX 60, TULARE, CA 93275 [phone], FAX: [phone] www.fisher-mfg.com

1000-8002 SLIP JOINT KIT

REV. A

fisher manufacturing company

4” C/C Deck Mount Gooseneck Faucet

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual field situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external finish (except at date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.

A full and complete copy of our One Year limited warranty is available upon request.

WARNING:

Proposition 65 requires that we provide you with the following notice: “This product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.”

#3515 - 4” c/c Deck Mount Faucet with 12” Swivel Gooseneck Spout

#3516 - 4” c/c Deck Mount Faucet with 12” Rigid Gooseneck Spout

#3525 - 4” c/c Deck Mount Faucet with 6” Swivel Gooseneck Spout

#3526 - 4” c/c Deck Mount Faucet with 6” Rigid Gooseneck Spout

KEEP THIS MANUAL FOR FUTURE REFERENCE

ANSI/A112.18.1M, ANSI/NSF 61.9

fisher manufacturing company - toll free: 800-421-6162 fax: [phone]

www.fisher-mfg.com

Installation Instructions for Deck Mount Faucets

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION

Installation Notes:

•Be sure to shut off water supply before beginning.

•Use pipe thread sealant such as PST on all threaded joints.

•Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

• Medium Sized Crescent Wrench

• Pipe Thread Sealant

PST

Package Contents

The box should contain the following:

Control Valve	Swivel or Rigid Gooseneck Spout	1000-8002	10456
Qty: 1	Length determined by model	Slip Joint Kit	Lube
	Qty: 1	Qty: (2)
	Swivel spout includes one 2002 snap ring
	and two 1600-5000 o-rings

Installation Instructions

1.Mount control valve on deck by inserting nipples through pre-drilled 7/8” holes in deck. Apply thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.

2a. If installing a rigid gooseneck spout, proceed to step 2b, otherwise apply lube to the o-rings on the swivel gooseneck spout. Make sure the white snap ring is in place before mounting the spout. Mount the spout and tighten the gooseneck spout nut onto the faucet spout outlet.

2b. If installing a rigid gooseneck spout, apply thread sealant to the spout and insert it into the control valve body. Tighten and orient the spout as required.

3a/3b. Turn on water supply and check for leaks.

Step 1

Thread Sealant

Goes Here

Slip Joints

Installation Instructions Continued

Step 2a

Step 2b

Apply O-Ring

Lube Here

Step 3a

Step 3b

Thread Sealant

Goes Here