Fisher 3255 Parts Manual
Replacement Parts for Backsplash Faucets
fisher manufacturing company
8” ADJ. WALL CONTROL VALVE
2000-5003
SEAT WASHER
SWIVEL
3200
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
RH SWIVEL STEM
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
2000-2301
2000-3002
BIBB CAP
10464
2000-5000
WASHER
3000-0010
OR
3000-0011
1000-7502
SCREW
10456
LUBE
0014 (24”)
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
12564
2.2 GPM
AERATOR
ANGLE STOP
WITH KEY
ANGLE STOP
W/ CROSS
HANDLES
1792
1790-1
15621
SPOUT NUT
2002
SNAP RING
1600-5000
SPOUT
O-RINGS
10456
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
3968
6” SWIVEL
GOOSENECK
SPOUT
3965
12” SWIVEL
GOOSENECK
SPOUT
8” Adjustable Wall Mount Faucet
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in
both our modern in-house testing center and in actual
fi eld situations under extreme conditions. Every detail
is thoroughly checked. Before we make our products
available to you, they pass each and every test. You get
proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except at
date of original purchase) or labor costs not specifi cally
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
#3255 - 8” Adj. Wall Mount Faucet with 12” Swivel
Gooseneck Spout
#1945 - 8” Adj. Wall Mount Faucet with 6” Swivel
Gooseneck Spout
3200-2306
ECCENTRIC
FLANGES
PART NO. 39284
18694
1/2” ECCENTRICS
2200-5000
ECCENTRIC
GASKETS
2200-0000
SLIP KIT
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
2400-2103
ELBOWS
REV. A
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Wall Mount Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your
supplier.
Tools Required for Installation
• Medium Sized Adjustable Wrench
Package Contents
The box should contain the following:
PST
Installation Instructions Continued
1/2” NPT Supply
Step 2
1/2” NPT Supply
Nipples (not Included)
Nipples (not Included)
7 3/4” - 8 1/4”
[196.9 - 209.6mm]
8” Adj. Wall Control Valve
Qty: 1
Length determined by model
Each spout includes one 2002 snap ring
Qty: 1
and two 1600-5000 o-rings
3200-2306
Eccentric Flanges
Qty: 2
3200-2307
1/2” Eccentrics
Qty: 2
2200-5000
Eccentrics Gaskets
Qty: 2
Swivel Gooseneck Spout
Installation Instructions
Step 1.
After unpacking items and checking for missing components, insert and center the gasket into the
female swivel inlets of the 8” control valve body. Loosely mount the eccentrics and fl ange onto
the control valve body.
Step 2.
Mount control valve body to either a wall with a male supply nipples, or backsplash with nipples
(not included). Be sure to use pipe thread sealant on the supply nipple threads. Adjust the eccentrics as needed in order to mount the control valve level. Once level, tighten the eccentrics.
Step 3.
Installing a swivel spout, apply lube to the o-rings on the gooseneck spout. Make sure the white
snap ring is in place before mounting the spout. Mount the spout and tighten the gooseneck spout
nut onto the faucet spout outlet.
Step 4.
Turn on water supply and check for leaks.
Step 1
Gasket
Eccentric
10456
Lube
Ø7/8”
(not included)
Step 3
Step 4
Elbows
7 3/4” - 8 1/4”
[196.9 - 209.6mm]
Supply lines
(not included)
Apply O-Ring
Lube Here
Flange
Loading...