Fisher 3176 Parts Manual
Replacement Parts for “Single & Double Pedal
Valve Wall Mount”
3070 - 0000 FOOT VALVE CYLINDER
1000 - 7001 NUT
1000 - 3011 RETAINER DISK
1000 - 5006 SEAT WASHER
fisher manufacturing company
“Single & Double Pedal Valve Wall Mount”
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability.
Every piece of equipment we make is rigorously
tested in both our modern in-house testing center and
in actual field situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
PART NO. 57037
3000 - 6001 SEAT
1600 - 5001 CYLINDER GASKET
1000 - 5005 STEM O - RING
1000 - 5005 CYLINDER O - RING
3070 - 6002 SPRING
3070 - 3402 STEM
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external finish (except at
date of original purchase) or labor costs not specifically
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
#3076 - Single Pedal Valve Wall Mount: Polished
Chrome.
#3176 - Double Pedal Valve Wall Mount: Polished
Chrome.
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for “Single & Double Pedal Valve Wall Mount”
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Adjustable Wrench
• Pipe Thread Sealant
• Screwdriver
PST
Package Contents
The box should contain the following:
3076 - Single Pedal Valve Wall Mount or 3176 - Double Pedal Valve Wall Mount
Installation Instructions
1. Turn off water supply
2. Mount single pedal control valve assembly to wall 4” on center with two no.4’s mounting screws, no
more than 9-1/8” from fl oor to center of mounting holes. Note: 5” on center, If Installing the 3176 (
Double Pedal Valve Wall Mount) (See step 1 illustration .)
3. Adjust the foot pedal to the desired height by, loosening the nut and bolt (See step 2 illustration.)
Note: Approximate height of pedal should be 1” from fl oor..(See step 3 illustration.)
4. Apply Tefl on Tape or pipe joint compound to threads of supply lines.
Connect supply lines with ½” NPT piping.
5. Turn on water supply and check for leaks.
Step 1
7ALL
v
v
Step 2
Step 3
7ALL
&OOT0EDAL
v
7ALL
v
!DJUSTHEIGHT
!DJUSTHEIGHT
&OOT0EDAL
&LOOR
v
v
&LOOR
Loading...