Fisher 3110 Parts List
Replacement Parts for Single Deck Faucets
fisher manufacturing company
Single Deck Dual Control Faucet
Product Installation Guide
13064
CONTROL VALVE
17396
SINGLE DECK DUAL
CONTROL HOSE 1/2”
F INLET
2000-5003
SEAT WASHER
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
3000-0010
LH SWIVEL STEM
OR
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
10456
LUBE
2.2 GPM
AERATOR
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
1792
ANGLE STOP
WITH KEY
17434
SINGLE DECK
DUAL CONTROL
MOUNTING KIT
12564
ANGLE STOP
W/ CROSS
HANDLES
3967
16” SWING SPOUT
3964
14” SWING SPOUT
3963
12” SWING SPOUT
3962
10” SWING SPOUT
3961
8” SWING SPOUT
3960
6” SWING SPOUT
1790-1
15621
SPOUT NUT
2002
SNAP RING
1600-5000
SPOUT
O-RINGS
10456
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
3000-0003
DOUBLE JOINT
SPOUT 7 1/4”
OR
4000-0002
DOUBLE JOINT
SPOUT 13”
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install the best.
Our hardware is manufactured with the standardization
of internal mechanisms. All chrome plating is triple
plated copper, nickel and chrome for durability.
Every piece of equipment we make is rigorously
tested in both our modern in-house testing center and
in actual fi eld situations under extreme conditions.
Every detail is thoroughly checked. Before we make
our products available to you, they pass each and
every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim.
This warranty does not cover external fi nish (except at
date of original purchase) or labor costs not specifi cally
authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited
warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the
following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth
Defects Or Other Reproductive Harm.”
KEEP THIS MANUAL FOR FUTURE REFERENCE
#3110 - Single Deck Dual Control Faucet with 6” Swing
Spout
#3111 - Single Deck Dual Control Faucet with 8” Swing
Spout
#3112 - Single Deck Dual Control Faucet with 10” Swing
Spout
#3113 - Single Deck Dual Control Faucet with 12” Swing
Spout
#3114 - Single Deck Dual Control Faucet with 14” Swing
Spout
#3118 - Single Deck Dual Control Faucet with 16” Swing
Spout
PART NO. 39349
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Single Deck Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Each spout includes one 2002 snap ring
Swing Spout
Length determined by model
Qty: 1
and two 1600-5000 o-rings
17434
Single Deck Dual
Control Mounting Kit
17396
Single Deck Dual Control
Hose 1/2” F Inlet
10456
Lube
Installation Instructions
1. After unpacking items and checking for missing components, insert threaded shank into
control valve body and tighten using screwdriver. Insert both hoses through cup washer and
up through pre-drilled 1 1/4” hole in deck. Apply lube to o-rings and attach hoses securely to
control valve
2. Lift up the cup washer to the underside of the deck and mount horseshoe washer onto
threaded shank. Mount the nut to the threaded shank and tighten until control valve is secure.
3. If installing a double joint spout, apply lube to the o-rings on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
4. Apply lube to the o-rings on the swing spout. Make sure the white snap ring is in place before
mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the
faucet spout outlet.
5. Turn on water supply and check for leaks.
Step 2
Step 3
Double Joint Spout
Apply O-Ring
Lube Here
View From Rear
Cup Washer
Horseshoe Washer
Nut
Step 4
Swing Spout
Apply O-Ring
Lube Here
Step 1
Step 5
Apply O-Ring
Lube Here
1 1/4” Hole
Drilled Through
Deck
Loading...