Fisher 3076 Parts List

Replacement Parts for “Single & Double Pedal
Valve Wall Mount”
3070 - 0000 FOOT VALVE CYLINDER
1000 - 7001 NUT
1000 - 3011 RETAINER DISK
1000 - 5006 SEAT WASHER
fisher manufacturing company
“Single & Double Pedal Valve Wall Mount”
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual field situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
PART NO. 57037
3000 - 6001 SEAT
1600 - 5001 CYLINDER GASKET
1000 - 5005 STEM O - RING
1000 - 5005 CYLINDER O - RING
3070 - 6002 SPRING
3070 - 3402 STEM
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external finish (except at date of original purchase) or labor costs not specifically authorized by Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is available upon request.
WARNING:
Proposition 65 requires that we provide you with the following notice: “This product Contains A Chemical
Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.”
#3076 - Single Pedal Valve Wall Mount: Polished Chrome.
#3176 - Double Pedal Valve Wall Mount: Polished Chrome.
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for “Single & Double Pedal Valve Wall Mount”
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Adjustable Wrench
• Pipe Thread Sealant
• Screwdriver
PST
Package Contents
The box should contain the following:
3076 - Single Pedal Valve Wall Mount or 3176 - Double Pedal Valve Wall Mount
Installation Instructions
1. Turn off water supply
2. Mount single pedal control valve assembly to wall 4” on center with two no.4’s mounting screws, no more than 9-1/8” from fl oor to center of mounting holes. Note: 5” on center, If Installing the 3176 ( Double Pedal Valve Wall Mount) (See step 1 illustration .)
3. Adjust the foot pedal to the desired height by, loosening the nut and bolt (See step 2 illustration.)
Note: Approximate height of pedal should be 1” from fl oor..(See step 3 illustration.)
4. Apply Tefl on Tape or pipe joint compound to threads of supply lines.
Connect supply lines with ½” NPT piping.
5. Turn on water supply and check for leaks.
Step 1
7ALL
v
v
Step 2
Step 3
7ALL
&OOT0EDAL
v
7ALL
v
!DJUSTHEIGHT
!DJUSTHEIGHT
&OOT0EDAL
&LOOR
v
v
&LOOR
Loading...