Fisher 3042 Parts List

REPLACEMENT PARTS

2000-8000

Button Index

Hot-red

or

2000-8001

Button Index

Cold-blue

2000-7500

Screw

Cross Handle

3071-3303

Bonnet Nut

3042-5000

3042-5004

Seat Washer

3042-7000

Seat Screw

O-Ring

3983

HANDLE CROSS KIT

3042-0000

Stem Kit For

Dipperwell Faucet

3042

Dipperwell

Faucet

3043

Dipperwell

Sink

73770

Inner Shell

Outer Shell

6541-2400

Waste Socket RC

1-1/2”x1-1/2”

6580-5000

Washer 1 1/2

Conn”

6550-2100

Lock Nut 1-1/2”

6280-5000

Washer 1”

fisher manufacturing company

Dipperwell Faucet and Accessories

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.

#3042 - FAUCET DIPPERWELL

#3043 - BOWL DIPPERWELL AS

#3041 - FAUCET DIPPERWELL SINK

PART NO.21326

73493

Chrome

Washer1-1/4”

73838

Washer

1-3/4”

73862

Lock Nut

3/8”

6544-0000

Tailpiece

1-1/2” x 4”

MANFACTURING COMPANY

PO BOX 60, TULARE, CA 93275

[phone], FAX: [phone]

www.fisher-mfg.com

6544-4400

Tailpiece

1-1/2” x 4”

73532

Nut

1-1/2”

REV.C

A full and complete copy of our One Year limited warranty is
available upon request.

Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:

www.P65Warnings.ca.gov.

KEEP THIS MANUAL FOR FUTURE REFERENCE

ANSI/A112.18.1M, ANSI/NSF 61.9

fisher manufacturing company - toll free: 800-421-6162 fax: [phone]

www.fi sher-mfg.com

Installation Instructions for Dipperwell Faucet

PST

Installation Instructions for Dipperwell Sink

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION

Installation Notes:

• Be sure to shut off water supply before beginning.

• Use pipe thread sealant such as PST on all threaded joints.

• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

• Crescent Wrench

• Drain Wrench ( Pipe Wrench can also be used )

• Pipe Thread Sealant ( Plumbers Tape )

• Plumber’s Putty

Package Contents

The box should contain the following:

Model #3042 Should Contain:

Faucet 73493

Chrome Washer

Model #3041 Should Contain all the
items above and the items below:

6544-4400

Tailpiece

Rubber Washer

6280-5000

73838

Washer

73862

73862

Lock Nut

Nut

Installation Instructions

Step 1. Unpack Unpacking items and

checking for missing components. Verify
that the rough-in holes are cut correctly
and are spaced accordingly.
(Figure 1)

Step 2. Faucet Installation

For Model #3043 skip to Step 3.

A. Slide the small washer onto the inlet
nipple of the dipperwell faucet. (Figure 2)

B. Insert nipple through the Ø11/16” rough­in hole through the deck. Figure 2)

C. Slide the large washer over the nipple
and hold in place against the backside of
the deck. (Figure 3)

D. Thread the locknut onto the nipple
against the large washer. Tighten with a
crescent wrench.

E. Using thread sealant, connect water
supply with a supply line.

F. For Model #3042 ONLY:

F. Turn supply “on.” Flush system and
check for leaks. Your installation is
complete! Please keep this manual for
future reference.

Model #3043 Should Contain:

73770

Inner Shell

6580-5000

Washer

Figure 1

#3042

Rough-in

Ø11/16"

[17.5mm]

[119.1mm]

Rough-in

Hole Spacing

Figure 2 Figure 3

Dipperwell
Faucet

Inlet Nipple

Small
Washer

Deck

4-3/4"

#3041

6541-2400

Waste Socket

#3043

Rough-in

Thread Sealant
Goes Here

Large Washer

6550-2100

Lock Nut

Locknut

Supply Line

Ø5-1/2"

[139.7mm]

Deck

A. Remove the inner shell from the outer shell
and place aside.

B. Press a bead of plumber’s putty onto the
inner lip of the waste socket. (Figure 4)

C. Insert the waste socket’s threaded end into
the bottom opening of the dipperwell sink.
(Figure 4)

D. Slide the fi ber gasket onto the waste socket’s
threads. Using a drain wrench, thread the
locknut onto the waste socket (Figure 5)

Be Sure to tighten slowly, allowing the
excess putty to squeeze out of the top.

e,f,g For Model #3041 ONLY.

E. Pre-assemble the tailpiece by sliding the 1­1/2” nut over the tailpiece tube threaded side
fi rst. (Figure 6)

F. Place the rubber washer onto the inlet of the
tailpiece (inside of the nut).

G. Using a drain wrench, tighten the tailpiece
onto the waste socket outlet. (Figure 7)

H. Insert the entire assembly into the 5-1/2”
rough-in hole though the deck. (Figure 8)

I. Connect the sink outlet to the drain plumbing
following proper plumbing codes and
regulations.

J. Remove excess putty from the outer lip of the
waste socket.

K. Insert the inner shell into the outer shell.
Check faucet for clearance. Turn water
supply on and check for leaks. (Figure 9)

Your installation is complete! Please keep
this manual for future reference.

Figure 4

Plumber’s Putty
Goes Here

Figure 5

Rubber
Washer

Figure 9*

Cut-away View

Figure 6

Figure 8Figure 7

* Tailpiece & Faucet
Shown Model #3041
ONLY

Deck