Fisher 3014 PARTS LIST
2000-5003
SEAT WASHER
Replacement Parts for Single Deck Faucets
3967
12815
CONTROL VALVE
RED BUTTON
BLUE BUTTON
LEVER HANDLE
DUCK GASKET
LH SWIVEL STEM
2000-7500
SCREW
2000-8000
AND
2000-8001
2000-3002
BIBB CAP
73657
73741
WASHER
3000-0010
1000-7502
SCREW
73521
LUBE
2000-0002
HANDLE LEVER KIT
3000-0001
LH SWIVEL STEM
REPAIR KIT
10022 (36”)
SUPPLY LINE
1/2” F x 1/2” F
10006 (36”)
SUPPLY LINE
1/2” M x 1/2” F
16” SWING SPOUT
3964
14” SWING SPOUT
3963
12” SWING SPOUT
3962
10” SWING SPOUT
3961
8” SWING SPOUT
3960
6” SWING SPOUT
55867
2.2 GPM
AERATOR
73684
SPOUT NUT
20020
SNAP RING
1600-5000
SPOUT
O-RINGS
73521
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
fisher manufacturing company
FAHB-KF-SDL
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.
#3010 - FAUCET SDLH 06SS
#3011 - FAUCET SDLH 08SS
#3012 - FAUCET SDLH 10SS
#3013 - FAUCET SDLH 12SS
#3014 - FAUCET SDLH 14SS
#1643 - FAUCET SDLH 16SS
PART NO. 40681
1790-1
ANGLE STOP
W/ CROSS
HANDLES
1792
ANGLE STOP
WITH KEY
3000-0003
DOUBLE JOINT
SPOUT 7 1/4”
OR
4000-0002
DOUBLE JOINT
SPOUT 13”
73794
SLIP JOINT KIT
A full and complete copy of our One Year limited warranty is
available upon request.
Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov.
KEEP THIS MANUAL FOR FUTURE REFERENCE
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
REV. A
www.fi sher-mfg.com
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
• Phillips Screwdriver
PST
• 7/16” Drill Bit
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swing Spout
Length Determined By Model
Each Spout Includes One 20020 Snap
Ring And Two 1600-5000 O-Rings
Qty: 1
73794
Slip Joint Kit
Qty: 1
73521
Lube
Installation Instructions
1. Mount control valve on deck by inserting the nipple through a pre-drilled 7/8” hole in deck.
Apply thread sealant to the nipple and attach slip joint kit. Tighten until control valve is secure.
2. If installing a double joint spout, apply lube to the o-ring on the spout. Mount the double joint
spout and tighten the nut onto the faucet spout outlet.
3. Apply lube to the o-rings on the swing spout. Make sure the white snap ring is in place before
mounting the swing spout. Mount the swing spout and tighten the swing spout nut onto the
faucet spout outlet.
4. Turn on water supply and check for leaks.
Step 2
Double Joint Spout
Apply O-Ring
Lube Here
Step 3
Swing Spout
Apply O-Ring
Lube Here
Step 1
Step 4
Thread Sealant
Goes Here
Slip Joint Kit
Loading...