Fisher 2046 PARTS LIST
2000-5003
SEAT WASHER
ANGLE STOP
W/ CROSS
HANDLE
ANGLE STOP
WITH KEY
Replacement Parts for Single Wall Faucets
10014 (24”)
3700
CONTROL VALVE
SWIVEL
1790-1
1792
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
2000-2301
LEVER HANDLE
2000-3002
BIBB CAP
10464
DUCK GASKET
2000-5000
WASHER
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
10456
LUBE
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10049 (24”)
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
3000-0000
RH SWIVEL STEM
REPAIR KIT
12564
2.2 GPM
AERATOR
2400-2103
ELBOW
6” Swivel
Gooseneck
Gooseneck
15621
SPOUT NUT
2002
SNAP RING
1600-5000
SPOUT
O-RINGS
10456
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
2200-0000
NIPPLE KIT
3968
Spout
3965
12” Swivel
Spout
fisher manufacturing company
Single Wall Faucet
Product Installation Guide
Since 1936, Fisher Manufacturing Company has
manufactured heavy-duty, high quality plumbing
products and hardware specialties for the food service
industry. For three generations, the Fisher family has
adhered to a strict dedication of and overall value.
When you install Fisher products… you install
the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome
plating is triple plated copper, nickel and chrome
for durability. Every piece of equipment we make is
rigorously tested in both our modern in-house testing
center and in actual fi eld situations under extreme
conditions. Every detail is thoroughly checked. Before
we make our products available to you, they pass
each and every test. You get proven performance.
Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against
defects in materials or workmanship for a period of
one year after the date of original purchase. During
this period Fisher Manufacturing Company will
replace a defective product or part without charge to
you, provided that the entire product is delivered to
Fisher Manufacturing Company. All transportation and
insurance charges for shipping the product to and from
Fisher Manufacturing Company must be borne by you.
Charges for transportation and insurance may, at the
option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty
claim. This warranty does not cover external fi nish
(except at date of original purchase) or labor costs
not specifi cally authorized by Fisher Manufacturing
Company.
A full and complete copy of our One Year limited
warranty is available upon request.
KEEP THIS MANUAL FOR FUTURE REFERENCE
#3715 - Single Wall Faucet with 12” Swivel
Gooseneck Spout
#2046 - Single Wall Faucet with 6” Swivel
Gooseneck Spout
PART NO. 42234
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
REV. A
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
Installation Instructions for Single Wall Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swivel Gooseneck Spout
Length determined by model
Swivel spout includes one 2002 snap ring
Qty: 1
and two 1600-5000 o-rings
10456
Lube
Installation Instructions
1. Mount control valve body to either a wall with a male supply nipple or a backsplash with nipple kit
(not included). Be sure to use pipe thread sealant on the nipple threads.
2. Installing a swivel spout, apply lube to the o-rings on the gooseneck spout. Make sure the white
snap ring is in place before mounting the spout. Mount the spout and tighten the gooseneck
spout nut onto the faucet spout outlet.
3. Turn on water supply and check for leaks.
Step 2
Apply O-Ring
Lube Here
Step 3
Step 1
1/2” Nipple
(Optional)
1/2” NPT Supply Nipple
(not included)
Ø7/8”
Slip Kit
(Optional)
Swivel
Gooseneck
1/2” Supply Line
(Optional)
1/2” Elbow
(Optional)
Loading...