Fisher 1902 Parts Manual

2000-5003

SEAT WASHER

HOT SIDE

71668 DECK SHUT OFF

VALVE LEFT HAND SWIV-

EL STEM

Replacement Parts for Widespread Deck

Faucets

2903 SINGLE

DECK BASE

RIGID

2000-7500

SCREW

2000-8000

RED BUTTON

2000-8001

BLUE BUTTON

LEVER HANDLE

2000-3002

BIBB CAP

73657

DUCK GASKET

73741

WASHER

3000-0011

RH SWIVEL STEM

1000-7502

SCREW

73521

LUBE

71684 DECK SHUT OFF

VALVE LEFT HAND SWIV-

AND

COLD SIDE

EL STEM

10022 (36”)

SUPPLY LINE 1/2” F X 1/2” F

10006 (36”)

SUPPLY LINE 1/2” M X 1/2” F

2000-0002

HANDLE LEVER KIT

SUPPLY LINE ADAPTER

3000-0000

RH SWIVEL STEM

REPAIR KIT

3000-0001

LH SWIVEL STEM

REPAIR KIT

SUPPLY LINE

73557

74752

1792

ANGLE STOP

WITH KEY

1790-1

ANGLE STOP

W/ CROSS

HANDLE

GOOSENECK

73794

SLIP JOINT KIT

3969

6” RIGID

SPOUT

3966

12” RIGID

GOOSENECK

SPOUT

fisher manufacturing company

FAHB-HW-WSLL

Product Installation Guide

Since 1936, Fisher Manufacturing Company has manufactured heavy-duty, high quality plumbing products and hardware specialties for the food service industry. For three generations, the Fisher family has adhered to a strict dedication of and overall value. When you install Fisher products… you install the best. Our hardware is manufactured with the standardization of internal mechanisms. All chrome plating is triple plated copper, nickel and chrome for durability. Every piece of equipment we make is rigorously tested in both our modern in-house testing center and in actual ﬁ eld situations under extreme conditions. Every detail is thoroughly checked. Before we make our products available to you, they pass each and every test. You get proven performance. Guaranteed.

Limited One Year Warranty

Fisher Manufacturing Company warrants its products and parts thereof (except as noted below) against defects in materials or workmanship for a period of one year after the date of original purchase. During this period Fisher Manufacturing Company will replace a defective product or part without charge to you, provided that the entire product is delivered to Fisher Manufacturing Company. All transportation and insurance charges for shipping the product to and from Fisher Manufacturing Company must be borne by you. Charges for transportation and insurance may, at the option of Fisher Manufacturing Company, be refunded depending upon our investigation of the warranty claim. This warranty does not cover external ﬁ nish (except at date of original purchase) or labor costs not speciﬁ cally authorized by Fisher Manufacturing Company.

A full and complete copy of our One Year limited warranty is available upon request.

Warning:This product can expose you to chemicals including Lead, Nickel (Metallic), Di(2-ethylhexyl) phathalate (DEHP) which are known to the State of California to cause cancer, and Lead. Di(2-ethylhexyl) phathalate (DEHP) which are known to the State of Califorina to cause birth defects or reproductive harm. For more information go to:

www.P65Warnings.ca.gov.

KEEP THIS MANUAL FOR FUTURE REFERENCE

#1902 - Widespread Deck Faucet with 12”Rigid Gooseneck Spout 2.2 GPM

#1778 - Widespread Deck Faucet with 6”Rigid Gooseneck Spout 2.2 GPM

#73378 - Widespread Deck Faucet with 12”Rigid Gooseneck Spout 0.35 GPM

#73379 - Widespread Deck Faucet with 6”Rigid Gooseneck Spout 0.35 GPM

ANSI/A112.18.1M, ANSI/NSF 61.9

PART NO. 42927

MANFACTURING COMPANY

PO BOX 60, TULARE, CA 93275

(800)421-6162, FAX: (800)832-8238

www.fisher-mfg.com

REV. A

fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238

www.ﬁ sher-mfg.com

Installation Instructions for Widespread Deck Faucets

BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION REGARDING BACKFLOW PREVENTION

Installation Instructions Continued

Installation Notes:

• Be sure to shut oﬀ water supply before beginning.

• Use pipe thread sealant such as PST on all threaded joints.

• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.

Tools Required for Installation

• Pipe Wrench

• Medium Sized Crescent Wrench

PST

• Pipe Thread Sealant

Package Contents

The box should contain the following:

Rigid Single

Deck base

Qty: 1

Left and Right

Deck Shut Oﬀ Valves

Qty: 1 of each

Rigid Gooseneck Spout

Length determined by model

Qty: 1

Supply Line Adapter

Qty: 1

Supply Line

Qty: 2

73521

Lube

Qty: 1

Installation Instructions

1. Cut rough-in holes.

2. Mount spout base, then tighten with washer and locknut.

3. Screw on supply line adapter, use pipe sealant on the connection, to the nipple.

4. Add a small amount of o-ring lube to the o-ring on the supply lines and tighten supply lines in the supply line adapter.

5. Mount both control valves, and tighten with locknut. Connect supply lines to control valves and tighten. Make sure supply lines are not kinked or crimped after install.

6. Apply thread sealant to male threads on the spout and insert into control valve. Tighten until secure.

7. Turn on water supply and check for leaks.

Step 2

Step 4

Spout Base

Washer

Locknut

Apply O-ring

Lube Here

Supply Line

Step 3

Step 5

Left Contol

Valve

Hot Cold

Spout Base

Apply Thread Sealant Here

Supply Line

Adapter

Right Contol

Valve

Step 1

ROUGH-IN:

4”

8”

7/8”

2-1/4”

Step 6

Step 7

Apply O-ring

Lube Here