Fisher 1821 PARTS LIST
2000-5003
SEAT WASHER
Replacement Parts for Deck Mount Faucets
3300
CONTROL VALVE
2000-7500
SCREW
1790-1
ANGLE STOP
W/ CROSS
HANDLES
1792
ANGLE STOP
WITH KEY
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
LEVER HANDLE
2000-3002
BIBB CAP
73657
DUCK GASKET
73741
WASHER
3000-0010
LH SWIVEL STEM
OR
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
73521
LUBE
2000-0002
HANDLE LEVER KIT
3000-0000
RH SWIVEL STEM
REPAIR KIT
OR
3000-0001
LH SWIVEL STEM
REPAIR KIT
SUPPLY LINE
1/2” F X 1/2” F
SUPPLY LINE
1/2” M X 1/2” F
GOOSENECK
GOOSENECK
10022 (36”)
10006 (36”)
3965
12” SWIVEL
SPOUT
3966
12” RIGID
SPOUT
SLIP JOINT KIT
6” SWIVEL
GOOSENECK
GOOSENECK
73794
3968
SPOUT
3969
6” RIGID
SPOUT
fisher manufacturing company
FAHB-BR-8DLL
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is
available upon request.
Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov.
KEEP THIS MANUAL FOR FUTURE REFERENCE
#1821 - FAUCET 8DLH 06SGN
#3315 - FAUCET 8DLH 12SGN
PART NO. 39225
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
ANSI/A112.18.1M, ANSI/NSF 61.9
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
REV. B
www.fi sher-mfg.com
Installation Instructions for Deck Mount Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Medium Sized Crescent Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Control Valve
Qty: 1
Swivel Gooseneck Spout
Length Determined By Model
Swivel Spout Includes One 20020 Snap
Ring And Two 1600-5000 O-Rings
Qty: 1
73794
Slip Joint Kit
73521
Lube
Installation Instructions
1. Mount control valve on deck by inserting nipples through pre-drilled 7/8” holes in deck. Apply
thread sealant to both nipples and attach slip joint kits. Tighten until control valve is secure.
Attach supply lines as required.
2. If installing a swivel spout, apply lube to the o-rings on the gooseneck spout. Make sure the
white snap ring is in place before mounting the spout. Mount the spout and tighten the gooseneck spout nut onto the faucet spout outlet.
3. Turn on water supply and check for leaks.
Step 2 - Swivel
Apply O-Ring
Lube Here
Step 3 - Swivel
Step 1
Thread Sealant
Goes Here
Slip Joints
Loading...