Page 1
3800 SINGLE
DECK BASE,
W/ SWIVEL
OUTLET
2000-5003
SEAT WASHER
HOT SIDE
71668 DECK SHUT OFF
VALVE LEFT HAND SWIVEL
STEM
73557
SUPPLY LINE
PART NO. 42323
Replacement Parts for Widespread Deck
Faucets
3967
16” SWING SPOUT
3964
14” SWING SPOUT
2000-7500
SCREW
2000-8000
RED BUTTON
AND
2000-8001
BLUE BUTTON
LEVER HANDLE
2000-3002
BIBB CAP
73657
DUCK GASKET
73741
WASHER
3000-0011
RH SWIVEL STEM
1000-7502
SCREW
73521
LUBE
COLD SIDE
71684 DECK SHUT OFF
VALVE LEFT HAND SWIVEL
STEM
HANDLE LEVER KIT
RH SWIVEL STEM
REPAIR KIT
LH SWIVEL STEM
REPAIR KIT
2000-0002
3000-0000
OR
3000-0001
AERATOR
10022 (36”)
SUPPLY LINE
1/2” F X 1/2” F
10006 (36”)
SUPPLY LINE
1/2” M X 1/2” F
1790-1
ANGLE STOP
W/ CROSS
HANDLE
1792
ANGLE STOP
WITH KEY
MANFACTURING COMPANY
PO BOX 60, TULARE, CA 93275
(800)421-6162, FAX: (800)832-8238
www.fisher-mfg.com
12” SWING SPOUT
10” SWING SPOUT
8” SWING SPOUT
6” SWING SPOUT
55867
2.2 GPM
3963
3962
3961
3960
34789
SUPPLY LINE ADAPTER
73684
SPOUT NUT
20020
SNAP RING
1600-5000
SPOUT
O-RINGS
73521
LUBE
19119
SWIVEL SPOUT
RETRO-FIT KIT
73794
SLIP JOINT KIT
REV. A
fisher manufacturing company
FAHB-KF-WSLL
Product Installation Guide
Since 1936, Fisher Manufacturing Company has manufactured
heavy-duty, high quality plumbing products and hardware
specialties for the food service industry. For three generations,
the Fisher family has adhered to a strict dedication of and
overall value. When you install Fisher products… you
install the best. Our hardware is manufactured with the
standardization of internal mechanisms. All chrome plating
is triple plated copper, nickel and chrome for durability. Every
piece of equipment we make is rigorously tested in both our
modern in-house testing center and in actual fi eld situations
under extreme conditions. Every detail is thoroughly checked.
Before we make our products available to you, they pass each
and every test. You get proven performance. Guaranteed.
Limited One Year Warranty
Fisher Manufacturing Company warrants its products
and parts thereof (except as noted below) against defects
in materials or workmanship for a period of one year after
the date of original purchase. During this period Fisher
Manufacturing Company will replace a defective product
or part without charge to you, provided that the entire
product is delivered to Fisher Manufacturing Company. All
transportation and insurance charges for shipping the product
to and from Fisher Manufacturing Company must be borne
by you. Charges for transportation and insurance may, at
the option of Fisher Manufacturing Company, be refunded
depending upon our investigation of the warranty claim. This
warranty does not cover external fi nish (except at date of
original purchase) or labor costs not specifi cally authorized by
Fisher Manufacturing Company.
A full and complete copy of our One Year limited warranty is
available upon request.
Warning:This product can expose you to chemicals
including Lead, Nickel (Metallic), Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
California to cause cancer, and Lead. Di(2-ethylhexyl)
phathalate (DEHP) which are known to the State of
Califorina to cause birth defects or reproductive harm.
For more information go to:
www.P65Warnings.ca.gov.
KEEP THIS MANUAL FOR FUTURE REFERENCE
fisher manufacturing company - toll free: 800-421-6162 fax: 800-832-8238
www.fi sher-mfg.com
#1686 - FAUCET WSLH 06SS
#1694 - FAUCET WSLH 08SS
#1708 - FAUCET WSLH 10SS
#1716 - FAUCET WSLH 12SS
#1724 - FAUCET WSLH 14SS
#1759 - FAUCET WSLH 16SS
ANSI/A112.18.1M, ANSI/NSF 61.9
Page 2
Installation Instructions for Widespread Deck Faucets
BE SURE TO CHECK WITH YOUR LOCAL DEPARTMENT HAVING JURISDICTION
REGARDING BACKFLOW PREVENTION
Installation Instructions Continued
Installation Notes:
• Be sure to shut off water supply before beginning.
• Use pipe thread sealant such as PST on all threaded joints.
• Check the packaging for missing items BEFORE beginning installation. If items are missing, contact your supplier.
Tools Required for Installation
• Pipe Wrench
• Medium Sized Adjustable Wrench
• Pipe Thread Sealant
PST
Package Contents
The box should contain the following:
Single Deck
Base, w/ Swivel
Outlet
Qty: 1
Deck Shut Off Valves
Installation Instructions
Left And Right
Qty: 1of Each
Swing Spout
Length Determined By Model
Swing Spout Includes One 20020 Snap
Ring And Two 1600-5000 O-Rings
Qty: 1
Supply Line Adapter
Qty: 1
Supply Line
Qty: 2
73521
Lube
1. Verify all components are there.
2. Mount spout base, then tighten with washer and locknut.
3. Screw on supply line adapter, use pipe sealant on the connection, to the nipple.
4. Add a small amount of o-ring lube to the o-ring on the supply lines and tighten supply lines in
the supply line adapter.
5. Mount both control valves, and tighten with locknut. Connect supply lines to control valves and
tighten. Make sure supply lines are not kinked or crimped after install.
6. Optional DJ swivel spout, apply lube to the o-ring on the spout. Mount the DJ swivel spout and
tighten the nut onto the faucet spout outlet.
7. When installing a swing spout, apply lube to the o-rings on the swing spout. Make sure the
white snap ring is in place before mounting the spout. Mount the swing spout and tighten the
nut onto the faucet spout outlet.
8. Turn on water supply and check for leaks.
Step 3
Step 5
Left Control
Valve
Hot Cold
Step 7
Spout Base
Apply Thread
Sealant Here
Supply Line
Adapter
Right Control
Step 4
Apply O-ring
Lube Here
Supply Line
Step 6
Valve
Double Joint
Spout, Swivel
Apply O-ring
Lube Here
Step 8
Step 1
ROUGH-IN:
4”
8”
7/8”
1-1/4”
Step 2
Spout Base
Swing
Spout
Apply O-ring
Lube Here
Washer
Locknut
Loading...