FirsTime & Co 31065 Instruction Manual

INSTRUCTION
MANUAL

31065 Gears Grandfather Clock

(E)

(A)

SIDE PANEL(B)

BACK PANEL (D)

(C)

(E)

(E)

(F)

(G)

2

carefully designed and crafted to give you years of dependable operation. Read

this booklet thoroughly before assembling and operating your clock in order to

become familiar with its many features and assure proper performance. Keep

these instructions in a safe place for future reference.

ATTENTION

In order to ensure that your clock is stable, adjust the levelers at the bottom of the

to the top of the clock and must be attached to the wall. It is recommended that

you do so.

HOW TO ASSEMBLE YOUR CLOCK CABINET

1. Carefully unpack all parts and compare each item to the following list

to be sure you have everything required.

QUANTITY DESCRIPTION

1 Top Unit (A)

2 Side Panels (B,C)

2. Place the BASE UNIT (G) near its final position but leave it away from

the wall until the assembly is finished.

1 Back Panel (D)

3 Shelf (E)

1

1 Base Unit (G)

8 Washers

8 Screws(Phillips head)

Base Plate (F)

3