N99J2WFMRS
Two-Way FM Remote
USER’S GUIDEUSER’S GUIDE
By Firstech, Inc.
Website: www.compustar.org
Safety Information Safety Information
Please take these safety precautions under the following conditions:
1. Servicing the vehicle
When servicing (i.e. changing the oil, washing your car) your automobile, the
CompuStar system should be in Valet Mode. There is a safety shutdown switch
under the hood that deactivates the remote starter function if the hood is open.
However, if the switch has been damaged or the switch has been installed
improperly, the vehicle may start when Button II is pressed for 2 seconds even if
the hood is open.
2. Loaning your vehicle to others
Whenever you loan your vehicle to an individual who is not familiar with
Compustar, please put the vehicle in Valet mode. This will prevent the vehicle
loaner from accidentally activating the CompuStar auto-security system.
3. For manual transmission vehicles
If the Compustar 2WSSR is installed in a manual transmission vehicle, extra
precautions are required because the Compustar does not monitor the gear
shift:
Important! Under normal circumstances, Reservation Mode is cancelled when
a door or hatchback opens. Please verify if the opening of any door or
hatchback cancels Reservation Mode. If any of the doors or hatchback is not
monitored by CompuStar because of improper installation or a faulty dome light
switch, do not use the CompuStar and take your vehicle to the dealer
immediately for repair.
Do not set Reservation Mode when the window(s) are open or if there is anyone
inside of the vehicle including animals.
RemoteRemote--Pager: 2WFMR w/LEDPager: 2WFMR w/LED
The model name, 2WFMR, stands for Two Way Frequency Modulation
Remote with L.E.D. This transmitter that allows you to activate multiple
functions by pressing a combination of 4 buttons on the unit in order to transmit
signals.
Installer Only
Installer Only
Remote-Pager Button Functions
Button Pressed For Function
1. I 1/2 sec Lock/Unlock
2. II 1/2 sec Auxiliary Option 1
3. III 1/2 sec Auxiliary Option 2
4. IV 1/2 sec Query Function
5. I - 2 sec N/A
6. II - 2 sec Auto-start Function - on/off
7. III - 2 sec Trunk Release – on/off
8. IV - 2 sec N/A.
9. (I+II) 1/2 sec N/A
10. (I+III) 1/2 sec Valet Mode – on/off
11. (II+III) 1/2 sec N/A
12. (II+IV) 1/2 sec Timer Start Mode - on/off
13. (III+IV) 1/2 sec Turbo Mode - on/off
14 (I+III) - 2 sec N/A
16. (I+II) - 2 sec Programming Menu 1 –
17. (I+IV) - 2 sec Programming Menu 2 –
Note:
- meand pressing the button for 2 seconds.
( ) means simultaneously pressing the buttons
( ) – means simultaneously pressing the buttons for 2 seconds
Remote Button Functions
Button Press
1. I Lock/Unlock
Function
ed For
Loading...