Télécommande
2W
AMR
G
bidirectionnelle AM
UID
E D
E
L ’ U T I L I S A T E U R
U
2W
S
AMR
E
R
Two-Way AM Remote
’S
G
UID
E
By Firstech, LLC.
www
.compustar
.org
By Firstech, LLC.
www
.compustar
.org
TABLE OF CONTENTS
1. Safety Information
2. Remote-Pager : 2WAMR w/LCD
3. Description of Remote Appearance
4.CompuGLO color LCD
5. LCD Icons
6. Remote-Pager Button Functions
7. More Button Functions
8. Remote-Pager Learn Routine
9.
Auto Start Function
10. Reservation Mode
11. Canceling Reservation Mode Page 11
12. Valet Mode
13. Safety Shut Down Features
14. Turbo Mode
15. Limited Lifetime Consumer Warranty
Page 4
Page 4
Page 5
Page 5
Page 6
Page 7
Page 8
Page 9
Page 9
Page 10
Page 12
Page 12
Page 12
Page 14
Page 2 Page 3
Safety Information
Please take these safety precautions into consideration under the following conditions:
1. Servicing the vehicle
W
hen servicing your automobile (i.e. changing the oil, washing your car), the
CompuStar system should be in Valet Mode. There is a safety shutdown sw
the hood that deactivates the remote starter function if the hood is open.
How
ever, if the switch has been damaged or the switch has been installed improperly,
the vehicle may start when
2. Loaning your vehicle to others
W
henever you loan your vehicle to an individual who is not familiar wi
you may want to put the vehicle in Valet mode. This will prevent the borrower from
accidentally activating the CompuStar auto-security system.
3. For manual transmission vehicles
If
the Compustar 2WAMR is
precautions are required because the Compustar does not monitor the gear shift :
Button IIis pressed for 2 seconds, even if the hood is open.
installed in a manual transmission vehicle, extra
itch unde
th Compustar,
r
Description of Remote Appearance
T
he model name,
2WAMR
Front Side Rear
, stands for
2 Way 4 Button Remote.
I m p o r t a n t !
w
hen a door or hatchback opens. Please verify that the opening of any door or
hatchback cancels Reservation Mode. If any of the doors or hatchback are not
monitored by CompuStar because of improper installation or a faulty dome light switch,
do not use the CompuStar and take your vehicle immediately to the dealer for repair.
D
o not set Reservation Mode if the window(s) are open or if there is anyone inside the
vehicle, this includes animals. Remote start installation in a manual transmissi
w
ith a convertible top is not recommended.
U
nder normal circumstances, Reservation Mode is cancelled
on vehicle
Remote-Pager : 2WAMR w/LCD
The model name, 2WAMR
Liquid Crystal Display
This transmitter allows you to activate multiple functions by pressing different
combinations of the 4 buttons on the unit.
.
stands for
Two Way Amplitude Modulated Remote with
Page 4
CompuGLO color LCD
The remote-pager comes with CompuGLO which is a unique color LCD display
that visually tells the vehicle owner the security status of your car at all times.
There are differing icons that will appear on your CompuGLO LCD indicating what
your vehicle is currently doing.
Page 5
LCD Icons
Remote-Pager Button Functions
Icon
Explanation
Indicates that Timer Mode is on.
Indicates that Turbo Mode is on.
Indicates that Passive Arming Mode is on.
Displays remaining battery life.
Indicates that your remote-pager is transmitting signals to the
controller unit.
Indicates that you are in Valet Mode.
Indicates that your car is locked or unlocked.
Indicates that the Shock Sensor has been triggered.
Indicates that your trunk is open.
Indicates that the RPS is on.
Indicates that someone is paging you from your vehicle.
Indicates that your vehicle has auto-started properly or that the
ignition is on.
Note : " "
Indicates that your door is open.
Indicates that your siren is turned on when locking or unlocking your vehicle.
10
11
12
13
14
15
Button(s)
1
2
3
4
5
6
7
8
9
I
I I
I I I
I V
II-
III-
I V -
( I + I I )
( I + I I I )
( I I + I I I )
( I I + I V )
( I I I + I V )
(I+III) -
(I+II) -
(I+IV ) -
Represents pressing the button for 2 seconds.
"
( )"Represents simultaneously pressing the buttons.
"
( )"Represents simultaneously pressing the buttons for 2 seconds.
Pressed
For
1/2 sec
1/2 sec
1/2 sec
1/2 sec
2 sec
2 sec
2 sec
1/2 sec
1/2 sec
1/2 sec
1/2 sec
1/2 sec
2 sec
2 sec
2 sec
Function
Lock / Arm
Unlock / Disarm
AUX 1
AUX 2
Query Function
Auto-start Function – on/off
Trunk Release
Panic, Press I to turn off the siren.
Siren Chirp – on/off
Valet Mode – on/off
Passive Arming – on/off
Timer Start Mode – on/off
Turbo Mode - on/off
Shock Sensor – on/off
Programming Menu 1
Programming Menu 2
Indicates that Vibration Mode is on.
Indicates that the Shock sensor is turned off.
Indicates that your Hood is open.
1. Time Clock.
2. Remainder of the engine running time.
Indicates that your parking lights are flashing.
Page 7Page 6
More Button Functions
Remote-Pager Learn Routine
(1) T
ime Setting
STEP 1
STEP 2
STEP 3
STEP 4
(2) RPS & V
ibration mode on or off
STEP 1
STEP 2
Button
(II+III) -
( I )
( I )
( I I )
(II+III) -
Button
(II+III)-
( I I I )
PressedFor
2 sec
1/2 sec
1/2 sec
1/2 sec
2 sec
PressedFor
2 sec
1/2 sec
Function
Tones will sound for confirmation
Time setting is on. The numbers will
flash, and tones will sound.
Change hour.
Change minutes.
Time setting is off. Tones will
sound.
Function
Tones will sound for confirmation
RPS on or off, tones will sound for
confirmation.
The Compustar system will allow up to three remotes to be programmed to one
vehicle. Please perform the following procedure to add or reprogram additional
remotes.
Step1 :
Step2 :
the transmitter has been programmed. You can continue
Activate Valet/Programming mode by manually turning the ignition
on and off five times
with the key within a 7 second period.
The parking light will flash once with successful
completion of this step.
Within a 7 second period after cycling the ignition for the 5
press button I. The parking lights will flash once to confirm that
programming additional remotes. The parking lights will flash two
times when the programming mode has expired.
(between Acc and On)
t h
time,
Auto-Start Function
Press button
Remember, that a key in the ignition is required to drive the car.
For manual transmission vehicles, please use reservation mode.
Press button
The engine will run 15 or 25 minutes (25 or 45 min for diesel) depending on preset
options at the time of installation and then shut off.
II
for 2 seconds to auto-start an automatic transmission engine.
I I
for 2 seconds in order to turn off an auto-started car.
Note :
( I V )
1/2 sec
Vibration mode on or off, tones will
sound for confirmation.
Step 2 must be completed within 15 seconds. If not, start over at step 1.
Page 8
-
shows the amount of run-time left in the remote
start mode.
A n t i - G r i n d
The anti-grind circuit (an optional feature provided by your installer) prevents you
from engaging the starter on a remote-started vehicle.
Page 9
Loading...