FirstBIKE Bicycle, BASIC, STREET AND CROSS, RACING, LIMITED EDITION Assembly Instructions Manual
ASSEMBLY INSTRUCTIONS
3
INTRODUCTION
Thank you for purchasing a FirstBIKE balance bike; “The Safest Balance Bike on the Street!”
When properly assembled and maintained, FirstBIKE will allow your child to safely develop their
balance while building con dence, gaining an appreciation for exercise and the outdoors, and
experiencing a “First Sense” of fun and adventure!
For visual assembly instructions, please refer to the “How to as semble FirstBIKE” video on the
SUPPORT section of the FirstBIKE.com website located at:
www. rstbike.com/support.
FIRSTBIKE ASSEMBLY
CONTENTS
FOR FirstBIKE “BASIC,” “STREET AND CROSS” MODELS
(FOR FirstBIKE “LIMITED EDITION“ AND “RACING“ MODELS SEE PAGE 7)
Part Qty. Description
A 1 pc. Headset axle
B 1 pc. Lubricant for headset axle
C 1 pc. Plastic cover for headset
D 1 pc. Wheel bolt (front) M 8 X 120 mm
E 1 pc. Self-locking nut M 8
F 1 pc. Hexagon (“Allen”) wrench 6mm (for the wheel bolt)
G 2 pcs. Adhesive (re ective) sticker sets
A
B
C
ED
F
G
4 5
ASSEMBLY INSTRUCTIONS
FIRSTBIKE “BASIC,” “STREET AND CROSS” MODELS
1.
2.
3.
4.
5.
Open plastic bags containing headset axle
(Part A), lubricant (Part B), and plastic cover
(Part C).
Open the lubricant (Part B) and lubricate the
headset axle (Part A) and contac t surfaces of the
front fork and frame using 2-3 drops for each
surface.
Hold the front fork and frame to gether at
the headset groove and insert the headset
axle (Part A), threaded side on top, into the
headset. To ensure the headset axle (Part A)
is inserted completely, the wheel bolt (Part D)
may be placed on top of the headset axle (Par t
A) and gently tapped into place with a rubber
mallet to avoid damaging parts.
Insert the plastic cover (Part C) into the groove
above the inserted headset axle (Part A) to
close the hole. To ensure the plastic cover (Part
C) is completely inserted, you may gently tap
the plastic cover with a rubber mallet to avoid
damaging parts.
To t the front wheel, turn the FirstBIKE upside
down so that it rests on the seat and handlebar.
6.
7.
8.
Align the front tire between the front fork
ensuring that the tire rotation direction matches
the rear tire and directional arrow on the tire.
The recommended / maximum tire in ation
pressure is 2,5 bar (36.25 PSI). DO NOT OVERINFLATE!
Insert the self-lock ing nut (Part E) into the
hexagonal hole on the lef t side of the fork
and insert and tighten the wheel bolt (Part D)
from the right side using the hexagon (“Allen”)
wrench (Part F).
For FirstBIKE models with brakes, the dis tance
between the handlebar and the brake lever
can be adjusted by tightening or loosening the
brake lever screw.
If necessary, adjust the brake cable tension with
the adjustment screw located at the end of the
brake cable by the rear wheel to ensure the
brake does not rub or engage when the brake is
not applied.
A
B
C
6 7
9.
10.
Apply adhesive stickers (Part G) according to the
included Sticker Position photos. Note that the
adhesive sticker for handlebar should be placed
over the plastic cover (Part C).
If you purchased the optional “LowK it” Lowering Kit for FirstBIKE, please refer to the
assembly instructions included with the “LowKit ” to properly install.
FIRSTBIKE ASSEMBLY
CONTENTS
FOR FirstBIKE “LIMITED EDITION” AND “RACING” MODELS
Part Qty. Description
A 1 pc. Headset axle
B 1 pc. Lubricant for headset axle
C 1 pc. Aluminum cover for headset
D 1 pc. Screw for aluminum cover
E 1 pc. Wheel bolt (front) M 8 X 120mm
F 1 pc. Self-locking nut M 8
G 1 pc. Hexagon (“Allen”) wrench 6mm (for the wheel bolt)
H 2 pcs. Adhesive re ective sticker sets
A
B
C
D
FE
G
H
NOTE:
Please keep the tires in ated according to
the recommended tire pressure indicated
on the wheel rim. DO NOT OVER- INFLATE!
8 9
ASSEMBLY INSTRUCTIONS
FirstBIKE “LIMITED EDITION” AND “RACING” MODELS
1.
2.
3.
4.
5.
Open plastic bags containing headset axle
(Part A) and lubricant (Part B) and bag
containing the aluminum cover for headset
(Part C), and screw for aluminum cover (Part D).
Open the lubricant (Part B) and lubricate the
headset axle (Part A) and contac t surfaces of the
front fork and frame using 2-3 drops for each
surface.
Hold the front fork and frame to gether at
the headset groove and insert the headset
axle (Part A), threaded side on top, into the
headset. To ensure the headset axle (Part A)
is inserted completely, the wheel bolt (Part E)
may be placed on top of the headset axle (Par t
A) and gently tapped into place with a rubber
mallet to avoid damaging parts.
Attach the aluminum cover for headset (Part C)
above the inserted headset a xle (Part A) with
the screw for aluminum cover (Part D) to close
the hole.
To t the front wheel, turn the FirstBIKE upside
down so that it rests on the seat and handlebar.
6.
7.
8.
Align the front tire between the front fork
ensuring that the tire rotation direction matches
the rear tire and directional arrow on the tire.
The recommended / maximum tire in ation
pressure is 2,5 bar (36.25 PSI). DO NOT OVERINFLATE!
Insert the self-lock ing nut (Part F) into the
hexagonal hole on the lef t side of the fork
and insert and tighten the wheel bolt (Part E)
from the right side using the hexagon (“Allen”)
wrench (Part G).
The distance between the handlebar and the
brake lever can be adjusted by tightening or
loosening the brake lever screw.
If necessary, adjust the brake cable tension with
the adjustment screw located at the end of the
brake cable by the rear wheel to ensure the
brake does not rub or engage when the brake is
not applied.
A
B
C
D
10
9.
10.
Apply adhesive stickers (Part H) according to
the included Sticker Position photos.
If you purchased the optional “LowK it” Lowering Kit for FirstBIKE, please refer to the
assembly instructions included with the “LowKit ” to properly install.
NOTE:
Please keep the tires in ated according to
the recommended tire pressure indicated
on the wheel rim. DO NOT OVER- INFLATE!
12 13
The following important safety instructions
must be observed and followed when using
FirstBIKE.
Please read thoroughly before using
FirstBI KE:
FirstBIKE complies with the strictest toy testing standards of the EU and US, in that minimal risk is associated with the correct use of
this toy.
Before a child uses FirstBIKE, always make
sure that the bike is in fully functional riding
condition and that no parts are damaged.
Regularly check and tighten all nuts and
bolts and make sure that tires are correctly
inflated. The valve caps on the wheels must
be tightened securely with an appropriate
tool. If small parts can be loosened from the
bike, there is a danger of unscrewed parts
being swallowed by small children.
If a defect is found, the bike must not be
ridden until the defect has been properly
repaired. Contact your local d ealer or distributor immediately regarding any defects or
damage.
The product must only be used by one child at
atime. The maximum weight load is 35 kg/77 lb.
The child must never use/ride FirstBIKE without adult supervision.
SAFETY WARNINGS
AND PRECAUTIONS
The FirstBIKE balance bike is designed for
children from 22 months to 5 years old (note:
the optional “LowKit” Lowering Kit is necessary for children from 22 to 30 months old).
The height of the seat is easily adjustable,
without tools, to the size of the little rider.
The adjustment of the seat height is as follows:
Without “LowKit” Lowering Kit:
34.5 cm to 44.5 cm/13.5 in to 17.5 in
With “LowKit” Lowering Kit:
30.5 cm to 40.5 cm/12.0 in to 15.9 in
After each seat height adjustment, the
“black star” knob used f or fastening the seat
post must be tightened securely so that the
seat post cannot slip while in use. Use both
hands if necessary. The seat height must
always be adjusted precisely to the size of
the rider: when the child is seated, both
feet must be flat on the ground with knees
slightly bent.
FirstBIKE is constructed with an “anti-jackknife” “Steering Limiter,” which prevents
the handlebar from making a full turn (rotation). This safety feature reduces the possibility of falling, but cannot entirely prevent
it. However, it must be noted that children’s
temperament and urge for physical activit y
may create unforeseen situations and riding
behavior, for which the manufacturer cannot
be held responsible.
Because the FirstBIKE frame is made of lightweight polyamide with 30% glass fiberglass,
the bike is very light. Without the brake, it
weighs only 3.5 kg/7.7 lb. and with the brake
only 3.9 kg/8.6 lb.
The child must be able to control their speed
at all times. In order to avoid accidents, prac-
tice braking with feet and teach the child
how to safely handle the bike. For FirstBIKE
models with rear-drum braking system, it is
very important to practice braking with the
child.
For FirstBIKE models with brakes, the
“SafetyStop” rear wheel drum-brake system
is suitable for use at approximately 2 1/2
years. Please note that your child, depending on their stage of development, will not
be able to operate the brake effectively and
consciously until approximately the age of
2 1/2 years. Mastering the use of the brake
in any given hazardous situation is necessary
for the brake to be efficient.
An adult should teach the child how to use
the brake and monitor their progress until
the child has acquired the appropriate braking skills. Different surfaces and traction,
and varying hazardous situations require
the controlled application of braking power. The early mastering of braking techniques will be agreat advantage when pro gressing to apedal cycle. The brake should
be checked regularly and adjusted as necessary (see Assembly Instructions Step 8).
Donot apply oil to the brake cable as it has
aTeflon housing.
Avoid riding FirstBIKE near roads and other
dangerous areas (e.g. swimming pools or
open water, areas with stairs, etc.)! FirstBIKE
must not be ridden on steep te rrain or downward slopes. Ride only in sufficient daylight
under the supervision of at least one adult.
While riding, the child must always wear
asafety helmet, safety vest, and appropriate
footwear.
YOUR CHILD SHOULD ALWAYS:
WEAR A HELMET, SAFETY VEST, AND APPROPRIATE FOOTWEAR
AT ALL TIMES WHILE RIDING FirstBIKE
RIDE FirstBIKE WHILE SUPERVISED BY AN ADULT
RIDE FirstBIKE IN A SAFE ENVIRONMENT FREE FROM TRAFFIC
AND DANGEROUS TERRAIN
14
MAINTENANCE
Although FirstBIKE will not require much maintenance under normal circumstances, it is important to check all par ts regularly. After extensive outdoor use, special at tention should be
paid to cleaning the following parts:
Contact area between frame and seat post
Contact area between frame and front fork
FirstBIKE can be cleaned with an ordinary water-soluble detergent. Never use any kid of solvent or aggressive cleaning product.
The tire pressure must also be checked regularly. See wheel rim for maximum tire
inflation pressure. The maximum is 2,5 bar (36.25 PSI). DO NOT OVER-INFLATE!
QUESTIONS?
FirstBIKE comes with a lifetime warranty on the frame and fork and a 5-year warranty on all
other parts.
REGISTER FOR WARRANTY HERE:
HTTP://WWW.FIRSTBIKE .COM/SUPPORT/
If you have any questions regarding the proper assembly of FirstBIKE balance bikes or the
FirstBIKE “LowKit” Lowering Kit, please contact your local distributor or e-mail us at:
info@firstbike.com.
Our international distributors can be found on internet: www.firstbike.com
LIMITED WARRANTY ON FirstBIKE BALANCE BIKE
What it covers?
The frame and the fork of the FirstB IKE are covered by a “lifetime” limited warranty for the period of ninety-nine (99) years. Parts other than the frame and fork (including, but not limited
to brake calipers, grips, seat, etc.) are covered by a 5-year limited warranty.
What is NOT covered?
This limited warranty does NOT cover any damage due to misuse, normal wear or tear, or damages caused by use inconsistent with the assembly and use instructions or with generally accepted safe riding practices. This warranty does not cover any FirstBIKEs that have been modi ed or repaired by a non-authorized person or dealer. This warranty does not cover parts that
were damaged in shipping or transit. This warranty does not extend to, or otherwise include,
consequential or incidental damages resulting from product use or from breach of warranty.
Who is covered?
This limited warranty extends only to the original purchaser of the FirstBIKE. FirstBIKE may
require documentation (receipt or proof of purchase) to confirm the purchaser prior to authorizing repairs or replacement under this warranty. This warranty is not transferrable and
you should register your FirstBIKE purchase on the FirstBIKE support page located here:
http://www.firstbike.com/support/
How long is the coverage?
The frame and fork of the FirstBI KE are covered by this limited warranty for a “lif etime” period
of ninety-nine (99) years from the date of original purchas e. All other parts are covered by this
limited warranty for a peri od of five (5) years from the date of original purchase. This warranty
applies only to the original purchaser and is not transferrable.
What FirstBIKE will do?
FirstBIKE will repair or replace, in its sole discretion and at its option, and at no charge to the
original purchaser, any parts covered by this warranty. For the frame and fork , FirstBIKE will
repair or replace defective parts and will provide the labor for such replacement or repair;
all other parts replaced under this warranty will be shipped to the consumer, who will be
responsible for installation.
How to obtain ser vice?
If you believe you need to f ile a warranty claim, please contact us at the information below to
obtain a return authorization. Please have your receipt or proof of purchase and the FirstBIKE
itself handy when you call. FirstBIKE will then issue you a return authorization with specific
instructions as to proceeding with a warranty claim.
How state law applies?
This warranty gives you speci c legal rights, and you may also have other rights which vary
from state to state. Some states do not allow for certain exclusions, so consult with your state
at torne y gen eral , with loca l leg al co unsel , or w ith yo ur lo cal d istr ibuto r to b e sure of yo ur rig hts.
PLEASE RETAIN THIS WARRANTY PAPERWORK AND ORIGINAL SALES RECEIPT
FOR EASY FUTURE REFERENCE AND DOCUMENTATION.
FirstBIKE Worldwide B.V. | Dokweg 27/B, IJmuiden | Postbus 391 | 1970 AJ IJmuiden | The Netherlands
www. rstbike.com | info@ rstbike.com
CUSTOMER SERVICE FOR USA AND CANADA:
The FirstBIKE Company, Inc.
Toll Free: 1-855-MY-1-BIKE (Monday through Friday 8:30 am to 5 pm EST)
info@firstbike.us | www.firstbike.us
CUSTOMER SERVICE FOR OTHER COUNTRIES:
Please contact your local distributor – our international distributors can be found on
www.firstbike.com
If your country is not yet listed, please contact us directly at
info@firstbike.com
Loading...