Nitrogen 7722-76-1 ≤ .5 NONE
FOR THE CYLINDER N/A
FOR LIQUID AGENT
SECTION 2 - HAZARDOUS IDENTIFICATION
FA101X / Potassium Lactate
N/A -Contents are a mixture / preparation
N/A -Contents are a mixture / preparation
IN CASE OF EMERGENCY: CHEMTREC
630-851-7330 / 630-851-8205
WARNING CONTENTS UNDER PRESSURE. This Fire Extinguishing Spray Tool is a pressurized
cylinder containing compressed gas, Nitrogen, and a liquid fire suppressant. Do not discharge in a
confined or unventilated space, Nitrogen will displace oxygen and act as an asphyxiant. This
TUNDRA Fire Extinguishing Spray Tool will still have pressure in it even after all the contents have
been discharged. None of the contents are combustable. This pressurized container may explode
when exposed to heat or flames. Use and store in accordance with the instructions.
N/A -Contents are a mixture / preparation
N/A -Contents are a mixture / preparation
BRK Brands, Inc. (First Alert)
3901 Liberty Street Road, Aurora, IL 60504
SECTION 3 - COMPOSITION / INFORMATION OF COMPONENTS WITHIN FIRE EXTINGUISHER
FOR COMPLETE CONTENT INFORMATION SEE ACCOMPANYING FA101X MSDS SHEET OR
CONTACT PIEDMONT CHEMICAL INDUSTRIES INC. AT 336 885 5131 OR FIRST ALERT AT 800 323
9005.
Do not induce vomitting. Give large quantities of water to dilute. Keep patient warm and
quit and get immediate medical attention.
Flush with water for a minimum of 15 minutes. If irritation persists seek medical attention.
SECTION 4 - FIRST AID MEASURES;
Wash affected area with soap and water. If irritation persists seek medical attention.
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Safety Data Sheet
FIRE EXTINGUISHING SPRAY TOOL
If affected, remove idividual to fresh air. If difficulty persists seek medical attention and
give oxygen.
Appearance and odor: Clear yellow liquid
10.5 - 11.5 Relative Density; NA NA
Water Soluble Yes NA
Fat Soluble NA
Evaporation rate (Butyl acetate=1) NA NA
Flammability ( solid / gas )
Auto-ignition temperature: DOES NOT IGNITE
Chemical Stability:
SECTION 5 - FIRE FIGHTING MEASURES
Use gloves, aprons and impervious coveralls as required.
Use face shields or safety goggles.
Follow instructions specified in the instruction manual.
Released or spilled contents:
DO NOT EXPOSE TO HIGH TEMPERATURES OR FIRE.
N / A - The product is a FIRE EXTINGUISHING AGENT
DO NOT EXPOSE TO HIGH TEMPERATURES OR FIRE.
Unusual fire and explosion hazards:
SECTION 10 - STABILITY AND REACTIVITY
N / A - The product is a FIRE EXTINGUISHING AGENT
Vapor pressure, mm Hg: N / A
SECTION 7 - HANDLING AND STORAGE
N / A - The product is a FIRE EXTINGUISHING AGENT
Follow the temperature limits specified on the product but no other special conditions are
required for safe storage.
SEE FA101X, MSDS 06-1753A
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
SECTION 9 - PHYSICAL AND CHEMICAL CHARACTERISTICS OF LIQUID AGENT IN PRESSURIZED
CYLINDER
Boiling point, °C : N / A
This product is a Fire Extinguishing device and is not flammable.
Product is not heavy but handle appropartatly. See personal protection in section 8.
Oxidizing properties: Not an Oxidizer
Vapor density (Air=1): N / A
SEE FA101X, MSDS 06-1753A, Contents are Stable
Wipe up material with towels and or rags or a mop if on floor.
SEE FA101X, MSDS 06-1753A
SECTION 6 - ACCIDENTAL RELEASE MEASURES
The product will not burn. But contents are under pressure. Keep away from fire. If
exposed to fire cool down product if possable and evacuate from area. Wear protective
equipment appropriate for fire conditions.
If needed or in confined area use a NIOSH approved respirator. Air-purifying respirators
provide no protection against an oxygen-deficient atmosphere. Air-purifying respirators do
not protect against an oxygen-deficient atmosphere.
Follow temperature limits on label.
SEE FA101X, MSDS 06-1753A
Hand and skin protection:
Eye protection:
Exposure Limits contents: